Xerox 7760GX - Phaser Color Laser Printer Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Xerox 7760GX - Phaser Color Laser Printer. Xerox 7760GX - Phaser Color Laser Printer 35 halaman. A3 colour laser printer
Juga untuk Xerox 7760GX - Phaser Color Laser Printer: Panduan Tambahan (16 halaman), Setup Manual (2 halaman), Panduan Referensi Cepat (5 halaman), Lembar Instruksi (6 halaman), Lembar Instruksi (14 halaman), Panduan Evaluator (18 halaman), Brosur & Spesifikasi (4 halaman)

Creating Custom TekColor Corrections

The Custom TekColor Corrections selection shows the 10 custom TekColor correction slots

that can be used to store the color corrections. When the printer selected is connected to the

computer using TCP/IP, PhaserMatch also shows the Short Name and other information about

the TekColor correction.

Target profiles can be either CMYK profiles or RGB profiles. Typically, applications, such as

Adobe Photoshop, use CMYK color mode. If you are using this color mode with your Phaser

printer, then the target profile used should be a CMYK target profile. Other applications, such

as Microsoft PowerPoint, use RGB colors. If you are printing from these applications use a

RGB target profile.

Note:

You can use the Delete Profile button to delete profiles from your printer.

For more information about this screen, click the Help (?) button in the PhaserMatch

application.

Phaser 7700 Printer

PhaserMatch adds new color corrections to the printer driver when it is used with a

Phaser 7700 printer. The application updates the driver files to make the new TekColor custom

color corrections available in the driver on the computer where PhaserMatch is installed. There

is no method provided within PhaserMatch to update the drivers on remote computers so

PhaserMatch should be installed on each computer that is going to be using the new color

corrections. You can print CMYK color images from your driver using the new color

corrections. You must have color management turned off in your application when using

TekColor corrections.

A printer setup wizard should have helped you create a printer driver. Only this printer driver

contains the TekColor tab that allows you to select the link profiles you create using

PhaserMatch.

PhaserMatch and PhaserCal 4.0 User Guide

3-4