Direct IP Idis DR-4100P Series Panduan Cepat - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Cepat untuk Perangkat Keras Jaringan Direct IP Idis DR-4100P Series. Direct IP Idis DR-4100P Series 17 halaman.
Halaman Cetak
Network Setup Wizard
After exiting from Quick Wizard, the network with
Network Wizard will start automatically.
● Start the Network Setup Wizard
● Internet
Connection
● LAN Setup
This test must be
performed before
proceeding to the next
step.
● FEN Setup
Enter the NVR name
registered on the FEN
server in the Device
Name field, and click
the Check to check its
availability.
● Finish the Network Setup Wizard
Camera Registration
Once Network Setup Wizard is complete, the system will
automatically enter Camera Registration mode and scan for
cameras connected to the NVR.
1
3
Camera Scan Button
1
Camera List Area
3
Apply/Cancel
5
Buttons
Camera Scan Button
Use this button to scan for and register cameras.
Pressing the Scan button displays the following submenu:
● Rescan: Scan for DirectIP™ cameras that were not
scanned automatically.
● Go To Camera: Moves the focus automatically to the
camera using MAC address of camera in the camera list.
● Auto Detection: Activated in Live mode. Automatically
notifies the user of unregistered DirectIP™ camera
connections.
● Screen Auto. Assign: Assigns the detected cameras on
the video display area.
● Third Party Scan: Used to manually scan for third-party
cameras that cannot be recognized by the auto scan
feature.
- Protocol: Select the protocol used by the camera (or
video encoder) you wish to search for.
Even if the network device uses a protocol
supported by the NVR, the device itself may not
be visible for scanning and registration by the
NVR. For more information about supported
network devices and models, contact your
retailer.
2
4
5
Camera View
2
Buttons
Video Display Area
4
7