Xerox 83 Series Panduan Pengguna - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Xerox 83 Series. Xerox 83 Series 44 halaman. Wide format printer
Juga untuk Xerox 83 Series: Panduan Petunjuk dan Tips (8 halaman)

Halaman Cetak
Xerox 83 Series Panduan Pengguna
Use the 2 screws (1) in the tension bar bracket to adjust the tension system. Referencing the
Step 3 :
figures below Line 1 is drawn in Position 1 and Line 2 in drawn in Position 2.
Tool : Hexagon wrench 3 mm
IF Line 2 lays...
BEFORE line 1 (Case A on image above)
BEHIND line 1 (Case B on image above)
Caution
•
Make sure to turn both adjustment screws an equal amount of turns.
Check the calibration again and repeat the adjustment until the lines overlap each other.
Step 4 :
REAR
1 = Adjustment screws
REAR
THEN turn the adjustment screws as follows :
3-15