Xerox AltaLink B8000 Series Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Printer Xerox AltaLink B8000 Series. Xerox AltaLink B8000 Series 20 halaman.

Halaman Cetak

Special Pages:

Controls how Special Pages are applied to your copy sets.

• Covers can be blank or contain images. They can also be printed on

different paper than the rest of your job.

• Chapter Starts ensure a chapter begins on the right or left side of the page,

with a blank page inserted if needed.

• Inserts are non-imaged page(s) that are placed into your copied sets.

• Exceptions are pages that are imaged on different paper.

Build Job:

Use this feature to produce complex jobs that include a variety of originals requiring different App settings. Each segment of the job can have different

settings. After all the segments are programmed, scanned, and temporarily stored in the printer, the job is processed and completed.

1. To clear previous App settings, touch Reset.

2. Touch Build Job.

3. Split the job into the required segments for scanning.

4. Program and scan the first segment:

a. Load the original document for the first segment.

b. Select the options required for the segment.

c. Touch Scan.

5. Set the required build job display options.

You can print a Sample segment or delete a segment.

a. To print a sample of the previous segment scanned, touch the segments option, then touch Sample Last segment.

b. To delete the previous segment scanned, touch the segments option, then touch Delete Last Segment.

c. To delete all the previous segment scanned, touch the segments option, then touch Delete All Segments.

6. Program and scan more segments.

a. Load the originals for the next segment.

b. To change the settings for the next segment, touch Program Next Segment, then select the options required for the segment.

c. Touch Scan Next Segment.

7. Continue scanning segments until all original documents are scanned.

8. Touch Submit.

Saved Settings:

To use a particular combination of copy settings for future copy jobs, you

can save the settings with a name and retrieve them for later use.

1. Change the settings required.

2. Touch Save Current Settings.

3. To create a new saved setting, touch any option labeled <Available>.

4. Enter a name for the saved setting using the touch screen keyboard,

then touch OK.

Retrieve Saved Settings:

You can retrieve and use any previously saved copy settings for current jobs.

1. Touch Retrieve Saved Settings.

2. Touch the saved setting required.

3. Touch OK. The saved settings are loaded for the current copy job.

Note: To delete a saved setting, touch the setting, then touch Delete Settings.

Touch Delete to confirm.

Page 9