Xerox ColorQube 9203 Cara Membuat Salinan - Halaman 9

Jelajahi secara online atau unduh pdf Cara Membuat Salinan untuk Printer Xerox ColorQube 9203. Xerox ColorQube 9203 9 halaman. Mfp
Juga untuk Xerox ColorQube 9203: Petunjuk Pemasangan dan Pengoperasian (14 halaman), Panduan Evaluator (28 halaman), Panduan Pengguna Cepat (38 halaman), Panduan Cepat (8 halaman), Panduan Cepat (16 halaman), Panduan Cepat (33 halaman), Instalasi dan Pengoperasian yang Aman (12 halaman), Instalasi dan Pengoperasian yang Aman (12 halaman)

Halaman Cetak
Xerox ColorQube 9203 Cara Membuat Salinan
®
Xerox
ColorQube™ 9201/9202/9203

How to Load Paper

4
5
1
Tray 1
2
Tray 2
3
Tray 3
Tray 4 (Bypass)
1.
Make sure the tray is in the down
position.
2.
For larger media, use the tray extension.
3.
Place media face down in the tray. Paper
must not be loaded above the maximum
fi ll line.
4.
Make sure that the paper guides just
touch the paper.
5.
The paper settings for the tray are
displayed on the touch screen.
6.
Check and confi rm or change the
settings.
Xerox ® and the sphere of connectivity design are trademarks of Xerox Corporation in the United States and/or other countries.
© 2009 Xerox Corporation. All rights reserved.
Machine Overview
1
3
2
4
Tray 4 (Bypass)
5
Tray 5
6
Tray 6 (Inserter)
1.
Press the button to open the door.
2.
Wait for the paper tray to lower.
3.
Place media face down in the tray.
Paper must not be loaded above the
maximum fi ll line.
4.
Close the door. The tray automatically
rises.
•
User Guide
•
Quick Use Guide
•
http://www.support.xerox.com
6
Tray 5
More information
Trays 1, 2 and 3
1.
Open the tray.
2.
Place the media face up in the tray.
Paper must not be loaded above the
maximum fi ll line.
3.
Trays 1 and 2 only. Make sure that
the paper guides just touch the
paper.
4.
Close the tray. The paper settings for
the tray are displayed on the touch
screen.
5.
Check and confi rm or change the
settings.
Tray 6 (Inserter)
1.
Place the media face up in the tray and
check it is the correct orientation for
that media.
2.
Paper must not be loaded above the
maximum fi ll line.
3.
Make sure that the paper guides just
touch the paper. The paper settings
for the tray are displayed on the touch
screen.
4.
Check and confi rm or change the
settings.