Xerox DocuColor 5750 Panduan Servis - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Servis untuk Printer Xerox DocuColor 5750. Xerox DocuColor 5750 40 halaman. Digital color printer / copier
Juga untuk Xerox DocuColor 5750: Panduan Referensi (8 halaman), Panduan Referensi (7 halaman), Panduan Referensi (7 halaman), Panduan Referensi (9 halaman), Panduan Tambahan (8 halaman), Panduan Memulai (46 halaman), Panduan Tambahan (10 halaman), Manual (9 halaman)

Status

Code

08-165

The control logic sensed a timing problem from the TC (Transfer Corotron) Jam Sensor.

Initial action:

Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner.

Clean the TC (Transfer Corotron) Jam Sensor.

Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth

(water) (REP 5.22) (REP 5.24).

Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10).

Check that there is no paper tacked to the Drum.

If the problem still exists:

Place a service call.

08-167

The control logic sensed a timing problem from the Misstrip Sensor On Check.

Initial action:

Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner.

Clean the TC (Transfer Corotron) Jam Sensor.

Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth

(water) (REP 5.22) (REP 5.24).

Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10).

Check for excessive wear, damage or proper installation of the Stripper Finger.

Check for a broken or arcing Transfer Corotron (TC) wire (REP 5.17).

If the problem still exists:

Place a service call.

5750 DocuCare Service Manual

Description/Direction

5/98

2-23

Fault Code Procedures