Xerox Phaser 3600 Panduan Peningkatan Firmware

Jelajahi secara online atau unduh pdf Panduan Peningkatan Firmware untuk Printer Xerox Phaser 3600. Xerox Phaser 3600 1 halaman. Toner cartridge remanufacturing
Juga untuk Xerox Phaser 3600: Fitur (1 halaman), Manual Opsi (1 halaman), Panduan Instalasi (2 halaman), Surat Volatilitas (1 halaman), Panduan Penggunaan Cepat (2 halaman), Panduan Evaluator (17 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Instalasi (1 halaman), Templat Aksesibilitas Produk Sukarela (11 halaman), Panduan Cepat (4 halaman), Instruksi (23 halaman)

CentreWare Internet Services (CWIS) Procedure for

upgrading firmware on a Phaser 3600 printer:

Copy the Phaser 3600 firmware file to your computer. If the file is in a .zip format,

unzip the file. You should have a file with the .fls extension.

Obtain the "IP address" for the Phaser 3600 printer to be upgraded. This can be

obtained from the Configuration Report. The machine "IP Address" is listed at the

bottom of this report. To print the report, Continue to press "Menu" on the device

until you get to "Reports". Press the right arrow until you get to "System Data"

then press "Enter". The report will now print.

Open Internet Explorer or other Browser application. Type in the IP address of

the Phaser 3600 to be upgraded (example: "http://12.345.67.890/"). Press the

Enter key to connect to the printer.

Select the Print button.

Select File Download under Print options (left side of screen).

Within the "File Download" screen, select "Browse" to access the location on your

computer where you have placed the .fls firmware file. Select the file and Enter.

Select the blue button below the filename window to begin the file download to

the printer. A "pop up" window will be displayed showing the file download status.

Once the file has been downloaded to the printer, the s

Download". Select OK to close the message window.

The firmware file will be installed on the printer.

You may print a Configuration Page to confirm the new firmware file vers

been installed. To do this from the browser window select "Print -> Print

Configuration Pages", select "Printer Configuration Page" then the blue button

Please refer to the "Firmware Version" title on the printed configuration page.

10.

You can now close the CentreWare Internet Services window.

creen will show "End of

ion has