Xerox Phaser 4 400 Panduan Servis - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Servis untuk Printer Xerox Phaser 4 400. Xerox Phaser 4 400 13 halaman. Laser printer
Juga untuk Xerox Phaser 4 400: Lembar Spesifikasi (2 halaman), Manual Kertas (42 halaman), Spesifikasi (3 halaman), Manual Dukungan (27 halaman), Setup Manual (24 halaman), Panduan Servis (20 halaman), Panduan Pemecahan Masalah (48 halaman), Panduan Evaluator (16 halaman), Panduan Penyiapan dan Referensi Cepat (41 halaman), Panduan Servis (15 halaman), Panduan Servis (9 halaman), Petunjuk Instalasi Driver (6 halaman), Panduan Pemeliharaan (9 halaman), Manual (22 halaman)

Servicing Electrical Components

Before starting any service procedure, switch off the printer power and unplug the

power cord from the wall outlet. If you must service the printer with power applied,

be aware of the potential for electrical shock.

Warning: Turning the power OFF using the On/Off switch does not

completely de-energize the printer. You must also

disconnect the printer power cord from the AC outlet.

Position the power cord so that it is easily accessible during

servicing so that you may power down the printer during

an emergency.

Warning: Do not touch any electrical component unless you are

instructed to do so by a service procedure.

Manually rotate drive assemblies to inspect drive gears.

Warning: Do not try to manually rotate or manually stop the drive

assemblies while any printer motor is running.

This printer uses heat to fuse the toner image to a sheet of paper. The Fuser Assembly

is very hot. Turn the printer power OFF and wait at least 5 minutes for the Fuser to

cool before you attempt to service the Fuser Assembly or adjacent components.

viii

S7300-02

S7300-03

Phaser 4400 Laser Printer Service Manual