Xerox Phaser 6200 Pengaturan Koneksi - Halaman 3

Jelajahi secara online atau unduh pdf Pengaturan Koneksi untuk Printer Xerox Phaser 6200. Xerox Phaser 6200 4 halaman. Color laser printer
Juga untuk Xerox Phaser 6200: Brosur & Spesifikasi (4 halaman), Instal Manual (2 halaman), Panduan Penyiapan dan Referensi Cepat (49 halaman), Manual Kertas (27 halaman), Panduan Petunjuk Instalasi (12 halaman), Manual Dukungan (26 halaman), Panduan Pemecahan Masalah (42 halaman), Spesifikasi (12 halaman), Manual (13 halaman), Daftar Bagian (48 halaman), Setup Manual (30 halaman), Panduan Fitur (33 halaman), Manual Opsi (8 halaman), Manual Fungsi (4 halaman), Petunjuk Pemeliharaan (4 halaman), Panduan Servis (9 halaman)

Halaman Cetak

Note:

If you use the installer from your printer's software CD-ROM, the IP Address is set automatically.

To manually set the printer's IP address:

1. At the printer's front panel, select

2. Scroll to the

Connection Setup Menu

3. Scroll to

TCP/IP Address Menu

4. Scroll to

DCHP/BootP

5. Scroll to

TCP/IP Address

6. Enter an IP address like the example above.

7. Scroll to

TCP/IP Network Mask

8. Enter a network (subnet) address. (If you use the IP address in the above example,

set a Subnet Mask of 255.255.255.0)

9. Scroll to

TCP/IP Gateway

10. Enter a Gateway (router) address. (If you use the IP address in the above example,

set a Gateway address of 192.168.1.1)

11. Scroll to

Exit

and press OK.

To set a static IP address on your computer:

Windows 95/98/Me

1. From the Start menu, right-click Network Neighborhood and select Properties.

2. On the Configuration tab, select the TCP/IP protocol for your network card, then select Properties.

3. On the IP Address tab, select Specify an IP address. Enter an IP address and Subnet Mask, and click OK.

(If you use the IP address noted above, set a Subnet Mask of 255.255.255.0).

4. Click OK and restart Windows.

Windows 2000/XP

1. From the Start menu, right-click My Network Places and select Properties.

2. Right-click Local Area Connection and select Properties.

3. If you do not have TCP/IP available, you should first click Add and select Protocol. Click Add and select

Internet Protocol TCP/IP.

4. On the General tab, select the TCP/IP protocol for your network card. Click Properties.

5. On the General tab, select Use the following IP address. Enter an IP address and Subnet Mask, and then click

OK. (If you use the IP address in the above example, set a Subnet Mask of 255.255.255.0).

6. Click OK and restart Windows, if prompted.

Windows NT 4.x

1. From the start menu, right-click Network Neighborhood and select Properties.

2. On the Protocols tab, select TCP/IP Protocol and click Properties.

3. On the IP Address tab, select Specify an IP Address. Enter an IP Address and Subnet Mask in the field and

click OK. (If you use the IP address noted above, set a Subnet Mask to 255.255.255.0.)

4. Click OK and restart Windows.

Page 2 of 3

and press OK.

Menus

and press OK.

and press OK until it displays OFF.

and press OK.