Xerox Phaser 850 Panduan Pengemasan Ulang - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengemasan Ulang untuk Printer Xerox Phaser 850. Xerox Phaser 850 50 halaman. Xerox phaser 850dp: supplementary guide
Juga untuk Xerox Phaser 850: Panduan Pemasangan Modul Baki (2 halaman), Panduan Instalasi (2 halaman), Spesifikasi (2 halaman), Manual Rilis Cepat (1 halaman), Panduan Tambahan (1 halaman), Panduan Tambahan (11 halaman), Setup Manual (1 halaman), Panduan Petunjuk Pembersihan (9 halaman), Panduan Servis (11 halaman)

Overview

Repacking the Color

Printer and Its

Accessories

It is very important that you follow the correct repacking procedure before

shipping the color printer. Complete repacking is required. Failure to properly

repack the printer can damage the printer's internal components. You are

responsible for any shipping damage to the printer that results from improper

or inadequate packaging.

Repacking for shipment consists of four basic tasks. Each of these tasks is

explained in detail. If you have questions regarding any of the repacking

procedures, call the Tektronix Customer Support Hotline at 1-800-835-6100 , or

contact Tektronix online at www.tek.com/Color_Printers/support/

Turn off the printer using the On/Off switch and then selecting Shut

Down For Moving Printer at the front panel.

Remove the maintenance drawer, seal it in a plastic bag, and store the

tray on a ﬂat surface. A used maintenance drawer leaks drum ﬂuid if tipped.

Make sure that the printer has completed its shut down before moving

the printer (after approximately 15 minutes, the front panel goes

blank); this allows the ink to solidify.

Repack the printer and its accessories using Tektronix-approved

packing materials.

Repacking the Color Printer and Its Accessories