Xerox Versant 2100 Press Harapan Pelanggan & Panduan Instalasi - Halaman 10
Jelajahi secara online atau unduh pdf Harapan Pelanggan & Panduan Instalasi untuk Printer Xerox Versant 2100 Press. Xerox Versant 2100 Press 49 halaman. Entry production color presses
Juga untuk Xerox Versant 2100 Press: Manual Keamanan (45 halaman)
Halaman Cetak
Detailed Specifications
Device Specifications
Control Panel Language Support
US English, Brazilian Portuguese, Catalan, Czech, Danish, Dutch, Finnish,
German, Greek, Hungarian, International English, International French,
International Spanish, Italian, Norwegian, Polish, Romanian, Russian,
Swedish, Turkish
Certifications
FCC Class A Compliant (US)
ICES Class A Compliant (Canada)
CSA Listed (UL 60950-1, Second Edition)
CB Certified (IEC 60950-1, Second Edition)
ENERGY STAR®
Environmental Choice
CE Marked
Common Criteria (IEEE 2600.2 standard)
IPv6
Dimensions and Weights
Configuration
Width
Base Configuration
105 in /
2,670 mm
For a detailed configurations table refer to the
Operating Environment
Operating Environment
Required Temperature
Range
Required Relative Humidity
Altitude (above sea level)
Sound Pressure Levels
For detailed information, refer to
Electrical Requirements
For detailed information refer to
Electrical
Base Configuration
Additional electrical required
for print server, feeding /
finishing devices
Power Consumption
Running (Average)
Standby Mode
Warm up Time from Power
off
Feature Specifications
Customer Expectation and Installation Guide
Depth
Height
32 in /
44 in /
807 mm
1,110 mm
Installation
section.
Xerox Versant 2100 Press
50° to 90° F (10° to 32° C)
15% to 85% RH
Max of 8,200 (2,500 meters)
Running: 65 dBA
Standby: 40.8 dBA
Environmental Requirements for the
Electrical
Requirements.
Xerox Versant 2100 Press
208–240 VAC, 50/60 Hz,
30A (sole use)/single phase/NEMA 14–30
115 VAC 15 Amp for 60 Hz or 220 VAC
10 Amp for 50 Hz (Western
Hemisphere)
220–240 Volts, 10 Amp, 50 Hz (Europe)
Xerox Versant 2100 Press
2,104 watts
576 watts
≤ 5 minutes
Print
First Print
Out Time
(FPOT)
Weight
1.631 lbs
/ 740 kg
Resolution
Press.
Line Screens
Front to
Back
Registration
Xerox Confidential
Xerox
Versant™ 2100 Press
®
Xerox Versant 2100 Press
* Using Centerline Paper
In "Ready Mode" the FPOT
is on average less than 11
sec. for color and less than
10 sec. for B/W.
At initial power on
copy/print, the system
requires between 30 and
45 seconds to produce the
first print.
Switching from a Color
Mode job to a B/W job or
the reverse requires on
average between 30-60
seconds.
60 seconds is always
needed after a paper jam
to ensure the system is
recovered from possible
contamination, and ensure
that the image quality is
optimized .
2400 x 2400 x 1 dpi** (Print
Engine Addressability)
1200x1200 dpi RIP resolution
**dpi = dots per inch
Halftone Screens
150, 175 (EFI only), 200, 300, 600 Clustered Dot
150 (EFI only), 200 Rotated Line Screen
FM (Stochastic) Screen
Trays 6/7 (OHCF) Registration:
52-300 gsm: +/- 0.5 mm
(*1,*2)
301-350 gsm: +/- 1.0 mm
(*1,*2)
Internal Trays:
52-256 gsm: +/- 1.0 mm
(*1,*2)
5
FPOT is measured from
the time the Printer
starts to the time the
trail edge of the sheet
exits the Offset Catch
Tray.
Note: If the system is
equipped with various
types of finishing
devices, the FPOT time
will vary depending on
the length of the paper
path needed to
transport that paper
Halftones Screens
supported:
300 dot, 200 line,
175 dot (EX/EX-P
only) 150 dot, 200
dot, and stochastic
Specification applies
only to Xerox Versant
2100 Press centerline
paper measured on an
11 x 17" (A3) sheet. To
achieve registration
results with paper other
than centerline paper,
Xerox recommends that
you use the FWA to
create custom media
profiles.
*1 – Referenced from
baseline Recommended
Media
*2 – Potential for
additional 0.2mm for
paper cut variation
from RML stocks. Non-
RML stocks may have
larger paper cut
variation which cannot
be guaranteed. Non-
RML stocks may also
cause contamination
that will contribute to
registration variations
and cannot be
guaranteed.