Xerox Versant 80 Press Harapan Pelanggan & Panduan Instalasi - Halaman 7

Jelajahi secara online atau unduh pdf Harapan Pelanggan & Panduan Instalasi untuk Printer Xerox Versant 80 Press. Xerox Versant 80 Press 48 halaman. Entry production color presses
Juga untuk Xerox Versant 80 Press: Panduan Keselamatan (26 halaman), Manual Keamanan (45 halaman)

Halaman Cetak

Xerox Versant 80 Press Harapan Pelanggan & Panduan Instalasi

Product Overview

Finishing Options

IMPORTANT: Refer to Configuration Dependencies for information on

configuration requirements for the finishing devices.

High Capacity

The HCS is designed for long production runs:

Stacker (HCS)

 Top tray has a maximum 500 sheet capacity.

 Stacking a maximum of 5,000 sheets (based on

80 gsm centerline paper) and offsetting the

output in the stack tray/cart

 The movable stack tray/cart provides easy

transition of the output to off-line finishing

 An additional stack tray/cart is available for the

customer to order

 Sample prints are additional prints that are

directed to the top tray for inspection. Sample

prints are not produced by redirecting sheets

from the stack tray/cart to the top tray;

therefore the contents in the stack tray/cart are

complete

Standard Finisher

The Standard Finisher features include a basic in-

line punch, stapler, the stacker tray, and top exit

tray. It also includes a built-in interposer (inserter)

and a built-in decurler unit that corrects the curl

on paper output from the print engine.

An optional C/Z Folder is available which includes

the C-Fold, Z-Fold, and Z-Fold Half Sheet. Refer to

C/Z Folder for more information.

Booklet Maker

The Booklet Maker Finisher features include a

Finisher

basic in-line punch, stapler, the stacker tray, top

exit tray, and a booklet unit capable of saddle

stapling and bi-fold. It also includes a built-in

decurler unit that corrects the curl on paper

output from the print engine and a built-in

interposer (inserter) that feeds cover paper to the

finisher for saddle-staple operation.

An optional C/Z Folder is available which includes

the C-Fold, Z-Fold, and Z-Fold Half Sheet. Refer to

C/Z Folder for more information.

Standard Finisher

The Standard Finisher Plus includes the

Plus

functionality of the Standard Finisher and adds

interface/trans- port module to enable connection

to third party finishing solutions.

An optional C/Z Folder is available which includes

the C-Fold, Z-Fold, and Z-Fold Half Sheet. Refer to

C/Z Folder for more information.

C/Z Folder

This optional unit can perform C-Fold, Z-fold, and

Z- Fold Half-Sheet (also called Engineering Z-

Fold). The C/Z Folder can be added to these

finishing devices:

 Standard Finisher

 Booklet Maker Finisher

 Standard Finisher Plus

SquareFold

This optional device is available only with the

Trimmer Module

Booklet Maker Finisher (with or without the C/Z

Folder). The SquareFold Trimmer Module flattens

the spine of the booklet and trims the face of the

booklet.

2-Knife Timmer

This optional device is available only with the

SquareFold Trimmer module. Provides full-bleed

trim up to 3/16" (5mm) thickness, adjustable trim

dimensions, no DFA required.

Customer Expectation and Installation Guide

Other Options

Foreign Interface

Kit

Convenience

Stapler

Common Access

Card Enablement

Kit

Network

Accounting Kit

USB Enablement

Kit

Configuration Dependencies

The following dependencies are required for all or certain configurations:

Performance

Package

Interface Module

GBC

AdvancedPunch

SquareFold

Trimmer Module

Standard Finisher

Plus

BR Finisher

BR Booklet Finisher

2-Knife Trimmer

Xerox Confidential

Xerox

Versant

80 Press

The Foreign Interface Kit enables the connection

of external devices such as auditrons or

coin-op devices. This will perform in copy and print

modes.

Staple up to 50 sheets of 90 gsm/24 lb media.

Security feature to identify user based on two-

factor identification requirement – access card

plus user PIN.

Enables reporting and user/device management in

combination with optional accounting solutions.

Enables scan-to-USB functionality.

Not compatible with:

 EFI Integrated

 BR Finisher

 OCT

The Interface Module is required with any system

configuration that has one or more finishing

devices, except the OCT or either BR Finishers.

Required on system configurations with:

 HCS

 Standard Finisher

 Standard Finisher Plus

 GBC Punch

Requires Interface Module plus:

 HCS

and / or

 Standard Finisher

 Standard Finisher Plus

This device requires the Interface Module and the

Booklet Maker Finisher. The SquareFold Trimmer

Module is not available with any other finishing

device.

This device requires the Interface Module and a

third-party finishing device.

 Must be ordered with V-Tra module

 Not compatible with any other finisher

 Does not require IFM

This device requires the Interface Module, the

Booklet Maker Finisher and the SquareFold

Trimmer.