Xerox WORKCENTRE 7120 Panduan Referensi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Printer Xerox WORKCENTRE 7120. Xerox WORKCENTRE 7120 30 halaman. Color networking mfp a3
Juga untuk Xerox WORKCENTRE 7120: Panduan Evaluator (25 halaman), Panduan Evaluator (24 halaman), Spesifikasi (14 halaman), Spesifikasi (14 halaman), Perbandingan Kompetitif (11 halaman), Perbandingan Kompetitif (11 halaman), Brosur & Spesifikasi (4 halaman), Panduan Referensi (29 halaman), Panduan Penggunaan Cepat (20 halaman), Panduan Penggunaan Cepat (20 halaman), Panduan Penggunaan Cepat (20 halaman), Panduan Penggunaan Cepat (20 halaman), Panduan Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Penggunaan Cepat (20 halaman), Panduan Referensi (32 halaman), Panduan Administrator Sistem (20 halaman)

BANNER SHEET (START SHEET)

PJL

@PJL SET JOBATTR= "@BANR=value"

Where value is one of the following:

START = start sheet

DEVICE = depend on device setting

OFF = no banner sheet

Use this command to specify the number of non-collated sets of a document in a print job.

PJL

@PJL SET COPIES = int

Where int is 1 to 999.

Use this command to specify the number of collated sets of a document in a print job.

PJL

@PJL SET QTY = int

Where int is 1 to 999.

This command specifies if a job is to print on one side or both sides of the sheet.

PJL

@PJL SET DUPLEX = value1

@PJL SET BINDING = value2

Where value1 is one of the following:

ON = Duplex

OFF = Simplex

Where value2 is one of the following:

LONGEDGE

SHORTEDGE

(value2 is used combined with value1=ON)

dc10cc0466

Customer Support

PCL

<ESC>&l intX

PCL

<ESC>&l int S

Where int is one of the following:

0 = simplex

1 = Duplex Long Edge Binding

2 = Duplex Short Edge Binding

Page 6