Xerox WORKCENTRE C2424 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Xerox WORKCENTRE C2424. Xerox WORKCENTRE C2424 21 halaman. Copier-printer
Juga untuk Xerox WORKCENTRE C2424: Panduan Referensi Cepat (14 halaman), Brosur (8 halaman), Panduan Tambahan (7 halaman), Spesifikasi (6 halaman), Panduan Pengguna (43 halaman), Panduan Memulai (26 halaman), Panduan Pengguna (20 halaman), Panduan Pemeliharaan (20 halaman), Panduan Pengguna (19 halaman), Petunjuk Manual (16 halaman), Manual (12 halaman), Petunjuk Manual (6 halaman), Panduan Instalasi (4 halaman), Panduan Instalasi (2 halaman), Penggantian Kit Rol Umpan (2 halaman), Setup Manual (2 halaman), Templat Aksesibilitas Produk Sukarela (10 halaman), Perbandingan Kompetitif (3 halaman), Panduan Referensi Cepat (14 halaman), Panduan Servis (11 halaman), Panduan Referensi Cepat (13 halaman)

Halaman Cetak
Xerox WORKCENTRE C2424 Panduan Pengguna
Setting the Scan Resolution
Depending on the way you are going to use the scanned image, you may want to change the
scan resolution. Scan resolution affects the size of the scanned image file as well as the quality.
To select the scan resolution:
1.
On the control panel, press the Scan button.
2.
In the menu, select
Scan
3.
Select one of the following, then press the Enter button.
■
100x100
– Produces the lowest resolution and smallest file size.
■
200x200
– Produces low resolution and small file size.
300x300
■
– Produces medium resolution and medium file size.
The following resolution options are available on systems configured with 512 MB RAM
or greater:
400x400
■
– Produces high resolution and large file size.
600x600
– Produces the highest resolution and largest file size.
■
Automatically Suppressing Background Variations
Sometimes, two-sided originals on thin paper show some of the text or images from the back
side of the paper. To improve your scanned images from this type of original, use the
Suppression
setting to minimize the sensitivity of the scanner to variations in light
background colors.
To change this setting:
1.
On the control panel, press the Scan button.
2.
Auto
In the menu, select
3.
Select either
On
or Off, then press the Enter button. The factory default is Off.
Resolution, then press the Enter button.
Suppression, then press the Enter button.
WorkCentre® C2424 Copier-Printer
4-7
Adjusting Scanning Options
Auto