Xerox WORKCENTRE C2424 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Xerox WORKCENTRE C2424. Xerox WORKCENTRE C2424 19 halaman. Copier-printer
Juga untuk Xerox WORKCENTRE C2424: Panduan Referensi Cepat (14 halaman), Brosur (8 halaman), Panduan Tambahan (7 halaman), Spesifikasi (6 halaman), Panduan Pengguna (43 halaman), Panduan Memulai (26 halaman), Panduan Pengguna (21 halaman), Panduan Pengguna (20 halaman), Panduan Pemeliharaan (20 halaman), Petunjuk Manual (16 halaman), Manual (12 halaman), Petunjuk Manual (6 halaman), Panduan Instalasi (4 halaman), Panduan Instalasi (2 halaman), Penggantian Kit Rol Umpan (2 halaman), Setup Manual (2 halaman), Templat Aksesibilitas Produk Sukarela (10 halaman), Perbandingan Kompetitif (3 halaman), Panduan Referensi Cepat (14 halaman), Panduan Servis (11 halaman), Panduan Referensi Cepat (13 halaman)

Halaman Cetak
Xerox WORKCENTRE C2424 Panduan Pengguna

Adjusting the Color Balance

Sometimes the colors on the original are not optimal. You can adjust the levels of each primary
color: cyan, magenta, yellow, and black.
To adjust these color levels:
1.
On the control panel, press the Copy button.
2.
In the menu, select
Color
3.
To adjust the level of cyan:
a.
Select
Cyan Color
b.
Press the Up Arrow or Down Arrow button to a whole number from
to
Lightest
(-3), then press the Enter button.
4.
To adjust the level of magenta:
a.
Select
Magenta Color
b.
Press the Up Arrow or Down Arrow button to a whole number from
to
Lightest
(-3), then press the Enter button.
5.
To adjust the level of yellow:
a.
Select
Yellow Color
b.
Press the Up Arrow or Down Arrow button to a whole number from
Lightest
(-3), then press the Enter button.
to
6.
To adjust the level of black:
a.
Black Color
Select
b.
Press the Up Arrow or Down Arrow button to a whole number from
Lightest
(-3), then press the Enter button.
to
Note
The factory default is Off;

Erasing the Edges of Copy Documents

You can clean the edges of your copies, eliminating unwanted material from printing, by
specifying the amount to erase on the right, left, top, and/or bottom edge. To do this:
1.
On the control panel, press the Copy button.
2.
Edge
In the menu, select
3.
To erase the left edge of the original page:
a.
Select Left, then press the Enter button.
b.
Press the Up Arrow or Down Arrow button to scroll to a number from
1.0
inches (in 0.1 inch increments) or from
then press the Enter button.
4.
To erase the right edge of the original page:
a.
Select Right, then press the Enter button.
b.
Scroll to a number from
through
25
mm (in 1 mm increments), then press the Enter button.
Balance, then press the Enter button.
Balance, then press the Enter button.
Balance, then press the Enter button.
Balance, then press the Enter button.
Balance, then press the Enter button.
(0
adjustment for each color).
Erase, then press the Enter button.
0
0.0
through
1.0
inches (in 0.1 inch increments) or from
WorkCentre® C2424 Copier-Printer
3-10
Adjusting Copying Options
Darkest (+3)
Darkest (+3)
Darkest (+3)
Darkest (+3)
through
25
mm (in 1 mm increments),
0.0
through
0