Xerox WorkCentre M118 Manual Perangkat Lunak - Halaman 10

Jelajahi secara online atau unduh pdf Manual Perangkat Lunak untuk Printer Xerox WorkCentre M118. Xerox WorkCentre M118 47 halaman. Drum cartridge remanufacturing
Juga untuk Xerox WorkCentre M118: Panduan Pengguna (2 halaman), Manual Modul (2 halaman), Kartu Instalasi Cepat (2 halaman), Panduan Pengaturan Cepat (5 halaman), Panduan Pengaturan Cepat (5 halaman), Manual (28 halaman), Manual Pemasangan Dudukan (4 halaman), Panduan Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Instalasi (1 halaman), Panduan Instalasi (1 halaman), Panduan Memulai (25 halaman), Panduan Evaluator (12 halaman), Panduan Servis (12 halaman), Petunjuk Produksi Ulang (14 halaman)

2 Operation with Windows 95, Windows 98 and Windows Me

Configuration Tab Settings

This section describes the settings of the Configuration tab.

Select the function that you want to set in the Features List and change the settings in

the Change box below.

NOTE: You can restore defaults by clicking [Restore Defaults].

NOTE: The settings that can be selected vary depending on which options have been

installed. Change these settings only after confirming that the option settings are

complete. See Options Tab Settings on page 12.

Image Enhancement - Specifies whether or not to use the Image Enhancement

function. Selecting [On] smooths out boundaries when printing. This reduces jagged

edges by artificially increasing the resolution of the image. When printing a bitmapped

image composed of coarse halftone dots, smooth color gradation is impossible in

certain situations. In this case, select [Off].

Draft Mode - Specifies whether or not to reduce the amount of toner used when

printing drafts. When [On] is selected, the overall printed color becomes lighter. This is

best for printing documents when high print quality is not necessary.

Bypass Feed Orientation - Specifies the paper orientation when printing from the

bypass tray. When feeding the short edge of the paper first, select [Landscape]. When

feeding the long edge of the paper, select [Portrait].

Xerox WorkCentre 118 Postscript® User Guide