Xerox XEScan Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Printer Xerox XEScan. Xerox XEScan 21 halaman.

3. Install the Software

Caution: If the software was previously installed on the computer, it must be removed before installing the

latest version. Perform the following removal procedure to uninstall the software.

A. Click Start > Settings > Control Panel. Double click on Add/Remove Programs.

B. On the Install/Uninstall tab, scroll down the list of programs to XES XEScan. Click on it and click

the Remove button.

C. After the removal of the program completes, click on the Synergix Diagnostics program and click

the Remove button.

D. After the removal of the program completes, click on Finish.

E. Close the control panel. Right click on the Start button and select Explore.

F. Navigate to the folder /Program Files and delete the XESystems folder.

G. Close the Explorer.

H. Restart the system.

Perform the following procedure to install the software.

1. Insert the CD-ROM into the PC CD-ROM Drive. The installation program automatically runs if Autorun is

enabled. If it is not enabled, click the Start button. Then click Run... and Browse to the CD drive.

Select the SETUP.EXE file and click Open. Then click OK.

2. Click on the pulldown menu and select the desired language. Click OK.

3. The welcome screen displays. Click Next.

4. Follow the instructions on the screen to install the Hardlock driver software.

5. A screen appears and displays the status of the driver installing. If the screen displays an error and

states that it cannot install the driver, go to Appendix A - Troubleshooting.

6. After the driver software is installed, the XEScan application software is installed.

7. The license screen is displayed. Read it thoroughly. If you agree to the terms, click Yes. If you do not

agree, click No and the installation terminates.

8. The application displays a screen offering the opportunity to change the folder where the XEScan

application is installed. Choose the default by clicking Next.

9. The application displays a screen requesting the selection of the type of installation. Select Typical.

Then click Next.

10. The Completion Status Bar screen appears and displays the status of the installation.

11. A screen appears and displays the status of the installation of the 'Hardlock' software. This software is

the parallel port dongle driver. If a message indicates an error during the 'Hardlock' installation, go to

Appendix A -Troubleshooting.

12. A Setup Complete screen appears.

13. The Diagnostics installation begins automatically. The Welcome Screen displays. Click on Next to

continue.

14. Fill in the User Name and Organization fields. Leave the radio button checked for Install this

application for: Anyone who uses this computer (all users). Click on Next.

15. Leave the Setup Type selected as Complete. Click Next.

16. Confirm that you wish to install the Diagnostics by clicking Next.

XEScan Solution Installation Guide