Xerox CopyCentre C90 Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Semua dalam Satu Printer Xerox CopyCentre C90. Xerox CopyCentre C90 24 halaman. Copycentre / workcentre pro auditron report software
Juga untuk Xerox CopyCentre C90: Panduan Memulai Cepat (16 halaman)

Halaman Cetak

Use the following examples when entering the telephone numbers.

Local number

External number

Phone Share Device When calling a machine that is on a line sharing device such as the

5. Select Call Remote and wait for the next window to appear. The connection is established

when <<Connect 19200 is displayed. The modem connection speed display may differ

depending upon your modem and line conditions.

If any of the following error signals occurs, check the indicated causes and retry.

• If the message No Dialtone is displayed, your PC's modem may not be connected to

the phone line.

• If the message No Carrier is displayed, your CopyCentre C65/C75/C90 WorkCentre

Pro 65/75/90 may not be connected to the phone line or it may be turned off. The

Reference Guide shows the location of the phone line connection to the CopyCentre

C65/C75/C90 WorkCentre Pro 65/75/90 in the Activating the Sixth Sense... section.

• In either of these error conditions, a window may eventually appear with a message:

Cannot Establish Reliable Connection.

When calling numbers connected to your local exchange simply enter

the telephone number. Entering 555-1212 would dial number 555-

1212. If your exchange allows the use of abbreviated numbers simply

enter the abbreviated number.

When calling a number that requires a dialing prefix to access an

outside line, simply add the additional number and a comma. For

example, entering 9,555-1212 would dial 9 (to gain access to outside

line), then pause for two-seconds (to wait for an outside line), then dial

555-1212.

Xerox Phone Share or the Stealth AccuPol-3 (with the machine plugged

into address 2 on the device), Entering 555-1212,,2,2,2 would dial 555-

1212, then pause four seconds (to wait for the call to go through), then

dial 2 to connect to the CopyCentre C65/C75/C90 WorkCentre Pro

65/75/90.

Note:

- The ,, provides enough time for the line sharing device to respond to

the call

- The last sequence of ,2 is repeated three times to ensure reliable

connection to the machine.