Xerox Docuprint 75 Panduan Tambahan - Halaman 32

Jelajahi secara online atau unduh pdf Panduan Tambahan untuk Semua dalam Satu Printer Xerox Docuprint 75. Xerox Docuprint 75 48 halaman. Tape client job submission guide enterprise printing system
Juga untuk Xerox Docuprint 75: Memulai (28 halaman), Manual Perencanaan (22 halaman)

Halaman Cetak

Managing and printing jobs from the Tape Client

Specifying the JDL, JDE, and form to start a job

2-8

4. If you selected Range, enter in the Range text field the file

numbers that you want to print, in the order that you want

them to be printed.

•

Indicate a range by entering the first and last file number,

separated by a hyphen (-). Numbers may be in ascending

or descending order.

•

Separate numbers and ranges by commas.

Example: 1, 4–6, 2,10–8

NOTE: Files on tape are sent to DocuSP as LCDS jobs (not as

LCDS reports) with a Job ID, which will display as the Document

Name on the Job Manager window.

Before you start a job, you must specify the initial job descriptor

library (JDL) and job descriptor entry (JDE) that will be used for

the job and for all the reports within the job that you print at that

time. The JDL and JDE define the appearance of the printed job.

(Refer to "The Job Source Library" in the Using LCDS Print

Description Language manual for detailed information on JDEs

and JDLs.)

You can also specify a form that will be used in all the jobs. This

form prints on every page of the job.

NOTE: If a form is already specified in the job itself, you do not

have to specify it here, unless you intend to override it using a

DJDE. In that case, you would specify in the Initial Form field

the form that will override the one that was specified in the job.

The system continues to use the resources that you specify for

all the jobs and reports that you print, unless you change the

specifications while the job is running.

The JDE, JDL, and form are part of the job Start command,

which you enter by making selections on the Tape Client window.

NOTE: You can also specify the JDL, JDE, and form before the

jobs are sent from the Tape Client, by specifying the properties of

the queue to which the jobs will be sent for printing. (Click Help

on the Queue Manager window for the procedures for setting up

a queue.)

Tape Client Job Submission Guide