Xerox WorkCentre Pro 65 Panduan Administrasi Sistem - Halaman 26
Jelajahi secara online atau unduh pdf Panduan Administrasi Sistem untuk Semua dalam Satu Printer Xerox WorkCentre Pro 65. Xerox WorkCentre Pro 65 30 halaman. Pdl reference guide
Juga untuk Xerox WorkCentre Pro 65: Panduan Memulai Cepat (16 halaman), Panduan Pengguna (24 halaman), Panduan Instalasi Jaringan (42 halaman), Panduan Referensi (22 halaman)
Halaman Cetak
Security
Page 1 - 14
Image Overwrite is available upon request. When available,
the overwrite components are enabled by the Machine
Administrator.
Immediate Image Overwrite ensures that all information
related to a job is immediately overwritten after the successful
completion of each job. You can view job overwrite status at
the machine using the Job Status pathway button located on
the User Interface. The system will display a fault message
and instructions if the overwrite was unsuccessful.
On Demand Image Overwrite irretrieveably overwrites all of
the physical areas of the disks that hold data. All jobs in the
active queue will be deleted and overwritten. Jobs sent during
the overwrite process are held and released after the
overwrite process has finished.
NOTE: Before you Start - Verify the Ethernet connection is
complete, the desired speed is set and all faults, messages
and jams are cleared.
Immediate Image Overwrite...
Go to the WorkCentre Pro and...
1. Enter the Tools pathway.
a) Press the Access (
b) On the keypad enter 1111 or the current password.
Press Enter. The Touch Screen will be used for the
remainder of the data entry, unless instructed
otherwise.
2. Enter setup menus
a) Press More
b) Press Configuration and Setup.
c) Press Optional Services.
d) Press Overwrite Security.
Xerox WorkCentre Pro System Administration Guide Supplement
or
) button.