Xerox 2101 Catatan Rilis Pelanggan - Halaman 13

Jelajahi secara online atau unduh pdf Catatan Rilis Pelanggan untuk Mesin fotokopi Xerox 2101. Xerox 2101 14 halaman. Digital copier/printer
Juga untuk Xerox 2101: Panduan Memulai (12 halaman), Panduan Pengguna (22 halaman)

Halaman Cetak
Xerox 2101 Catatan Rilis Pelanggan
5. In the Fiery Printing tab, open the Paper Source bar and choose the following settings:
6. In the Fiery Printing tab, open the Layout bar and choose the following settings:
7. For a stapled booklet, open the Finishing bar and set Stapler Mode to Center.
8. Click OK to close the Properties window.
9. Set the number of copies.
10. Click OK to submit the job for printing.

Print options

Tab Printing

8.5 x 11-SEF (A4-SEF)
Page Size:
11 x 17 (A3)
Print Size:
On
Scale to Fit:
Choose Portrait for vertical spine or Landscape for horizontal spine.
Orientation:
Standard Booklet
Booklet Maker:
Clear this option.
Imposition Reduction:
When you set Booklet Maker, a conflict message appears regarding Half-Fold
N
:
OTE
(inside). To resolve the conflict, click OK.
Perfect Booklet Imposition
Booklets are folded backwards, but if you select reverse-order printing, they are folded
properly.
Punch options
If a Punch unit is installed on the Xerox 2101 copier, you can specify punched output. You
must select a setting for both the Punch Edge and Punch Holes options. If either option is
set to None, no holes are punched.
Some combinations of page size and punch edge are not allowed by the copier even
N
:
OTE
though you can specify the combination when you print. Jobs with invalid combinations of
page size and punch edge are printed but not punched. For more information, see the
copier documentation.
Stapler Mode option
Use the Dual (Left or Top) setting of the Stapler Mode option to finish a job with two
staples. A portrait-oriented job is stapled on the left edge, and a landscape-oriented job is
stapled on the top edge.
The icons in the printer driver do not show the correct staple positions for a
N
:
OTE
landscape-oriented job.
Tab printing (EFI Hot Folders/Tab Wizard option)
A tab cannot be the first sheet of a document. The workaround is:
1. Set and create the tabs through the Tab Wizard.
2. Process and Hold the job.
3. Select Preview.
4. Under the Preview window, drag the tab to be the first page and then print.
To use the Tab Wizard, you must install Adobe Acrobat, which is provided with the EFI
Hot Folders/Tab Wizard option.
Page 13