Xerox DocuColor 2045 Panduan Operator - Halaman 25
Jelajahi secara online atau unduh pdf Panduan Operator untuk Mesin fotokopi Xerox DocuColor 2045. Xerox DocuColor 2045 40 halaman. Xerox docucolor 5252: reference guide
Juga untuk Xerox DocuColor 2045: Gunakan Manual (2 halaman), Daftar Bahan yang Direkomendasikan (4 halaman), Daftar Bahan yang Direkomendasikan (5 halaman), Manual Perencanaan (22 halaman)
Halaman Cetak
8
9
Name
1
Ready light
2
Sample set
button
3
Unload
button
4
Unload light
5
Wait light
6
Fault code
display
7
Top tray jam
area
8
Bypass jam
area
9
Stacker tray
jam area
Keypad
E HC S
F O R D O C U C O L O R
Control Panel
7
1
The Ready light blinks during initialization and is constant when the EHCS
is in use or in standby mode.
Press to have the EHCS deliver the next collated set to the top tray.
Press once to lower the Stacker Tray and unlock the front door. If pressed
while running a job, all sheets in the paper path are delivered before the
Stacker Tray starts to lower.
Illuminates when the Stacker Tray has reached the down position and the
front door can be opened.
Blinks when the Stacker Tray is moving up or down.
Refer to the fault code table later in this section.
Blinks when there is a jam.
Blinks when there is a jam.
Blinks when there is a jam or the door is open.
Used by the service representative for diagnostics (not shown). The
keypad is located on the front right of the control panel.
2 06 0/ 2 04 5 O
P E R A T O R
E
N H A N C E D H I G H C A P A C I T Y S T A CK E R
3
2
Figure 2. EHCS Control Panel
Function
M
A N U A L
6
4
5
3