Xerox Wide Format 6030 Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin fotokopi Xerox Wide Format 6030. Xerox Wide Format 6030 22 halaman. Wide format twain
Juga untuk Xerox Wide Format 6030: Catatan Rilis (7 halaman), Setup Manual (20 halaman), Catatan Rilis (23 halaman), Catatan Rilis (8 halaman), Catatan Rilis (8 halaman), Catatan Rilis (9 halaman), Panduan Pelatihan Pelanggan (50 halaman), Panduan Pengguna (36 halaman), Panduan Pengguna (48 halaman)

1.2

HDI Installation

The following example is to configure a local non-system plotter and network non-

system plotter.

Un zip the driver file. This will create subdirectories for 2000, 2000i, 2002

and 2004.

Open the AutoDesk Plotter Manager.

In the AutoDesk Plotter Manager, double-click the Add-a-Plotter wizard.

In the Add-a-Plotter wizard, read the Introduction, and then choose Next to

advance to the Add Plotter - Begin page.

On the Add Plotter - Begin page, choose My Computer. Choose Next.

Choose Have Disk to locate the HIF file on that driver disk, and install the

driver supplied with your plotter.

On the Add Plotter - Plotter Model page, select a manufacturer and model.

Choose Next.

•

(Optional) The Import PCP or PC2 screen enables you to use configuration

information from a PCP or PC2 file created with an earlier version of

AutoCAD.

On the Add Plotter - Ports page, select the port to use when plotting. Choose

Next. The ports available for the specified device are displayed.

1.2 HDI Installation