Xerox WORKCENTRE 5790 Panduan Instalasi - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Mesin fotokopi Xerox WORKCENTRE 5790. Xerox WORKCENTRE 5790 43 halaman. Smart card
Juga untuk Xerox WORKCENTRE 5790: Manual Informasi (50 halaman), Panduan Referensi (7 halaman), Panduan Evaluator (24 halaman), Lembar data (18 halaman), Lembar Informasi (8 halaman), Panduan Memulai (32 halaman), Instalasi dan Pengoperasian yang Aman (11 halaman), Panduan Pengguna (8 halaman), Cara Membuat Salinan (10 halaman)

Installation

Check the Proxy Server details are configured

If required by your network

environment, ensure the Proxy

Server details have been

configured.

Select the Properties tab, then

Connectivity, Protocols and

Proxy Server and enter the

details.

Select Apply.

The Smart Card settings are now

configured.

The Smart Card settings are now

configured. You are now ready to install

the Smart Card hardware using the

instructions starting on page 26.

Xerox WorkCentre 5735/5740/5755/5765/5775/5790 (System Software 06x.131.xxx.xxxxx):

At the WorkCentre, press the Machine Status button on the control panel.

Select the Tools tab.

Enter the appropriate User ID and Password to access Tools.

Note:

The default user name and password are: admin and 1111.

Select Service Settings.

Select Optional Services.

Select Smart Card.

Using the keypad, enter the Feature Enablement Key included in the Smart Card Enablement Kit,

and press Enter.

Xerox® Smart Card

Installation Guide