Xerox WorkCentre M128 Panduan Referensi - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Mesin fotokopi Xerox WorkCentre M128. Xerox WorkCentre M128 20 halaman. Drum cartridge remanufacturing
Juga untuk Xerox WorkCentre M128: Panduan Evaluator (12 halaman), Brosur & Spesifikasi (6 halaman), Instal Manual (2 halaman), Manual Jaringan (50 halaman), Manual Pemindaian (28 halaman), Kartu Instalasi Cepat (2 halaman), Panduan Pengaturan Jaringan Cepat (7 halaman), Panduan Servis (22 halaman), Petunjuk Produksi Ulang (14 halaman)

Halaman Cetak
Xerox WorkCentre M128 Panduan Referensi
Feature
Simplex
Duplex
Orientation
Force short
edge feeding
Job Mode
Job Type
Page
14
dc05cc0364
Implementation
<ESC>&l int X
@PJL SET DUPLEX =
value1
<ESC>&l int S
@PJL SET DUPLEX =
value1
@PJL SET BINDING =
value2
<ESC>&l int S
@PJL SET ORIENTATION
= value
<ESC>&l int O
@PJL SET
PAPERDIRECTION = value
@PJL JOB MODE = value
@PJL SET HOLD = value
(see Example 3)
@PJL SET HOLD = value
@PJL SET
HOLDKEY="four-digit string"
(see Example 4)
Values
Where int is:
1～999
Where value1 = OFF (simplex)
Where int is one of the following:
0 = simplex
Where value1 = ON (duplex)
Where value2 is one of the following:
LONGEDGE
SHORTEDGE
(Use value2 combined with value1 =
ON)
Where int is one of the following:
1 = Duplex long edge binding
2 = Duplex short edge binding
Where value is one of the following:
PORTRAIT
LANDSCAPE
Where int is one of the following:
0 = Portrait
1 = Landscape
2 = Reverse portrait
3 = Reverse landscape
Where value is one of the following:
SEF = Short Edge Feed
LEF = Long Edge Feed
Where value = PRINTER
Where value = PROOF (proof print)
Where value = STORE (confidential
print)
The
HOLDKEY variable acts as a password
to release a job held by the Store value
The variable value is any four-digit
value from 0000 to 9999. The default
value is "".
WorkCentre M128/M123 Reference Guide
.