Xerox WorkCentre Pro 123 Manual Jaringan - Halaman 6

Jelajahi secara online atau unduh pdf Manual Jaringan untuk Mesin fotokopi Xerox WorkCentre Pro 123. Xerox WorkCentre Pro 123 50 halaman. Stand installation guide
Juga untuk Xerox WorkCentre Pro 123: Panduan Instalasi (2 halaman), Panduan Evaluator (12 halaman), Brosur & Spesifikasi (6 halaman), Brosur & Spesifikasi (6 halaman), Instal Manual (2 halaman), Manual Pemindaian (28 halaman), Kartu Instalasi Cepat (2 halaman), Panduan Pemasangan Kit Keluar (4 halaman), Panduan Pemasangan Perangkat Keras (4 halaman), Panduan Pemasangan Modul Dua Baki (4 halaman), Panduan Instalasi Inverter (2 halaman), Panduan Instalasi (2 halaman), Panduan Pemasangan Perangkat Keras (2 halaman), Manual Pemasangan Dudukan (2 halaman), Panduan Pengaturan Jaringan Cepat (7 halaman)

The DNS setting must be entered through CentreWare Internet Services. From a workstation, open a web

browser (such as Internet Explorer), and then enter the IP address in the format http://xxx.xxx.xxx.xxx

(the xxx's represent the device IP address). If connected properly, you should see a CentreWare Internet

Services web page for your device.

Note

CentreWare Internet Services is a powerful tool for configuring the WorkCentre device remotely.

The default user name is 11111 and the password is x-admin. The user name and password are

case-sensitive and should be changed after install.

The Default Gateway, Subnet Mask, and DNS address settings can be entered via CentreWare

Internet Services if the device is on the same subnet as the workstation. To access them via CentreWare

Internet Services:

Click the Properties tab

Click the Protocols Settings folder.

Click TCP/IP.

10.

Load the print drivers on the workstations that will be accessing the device.

Note

For more detailed instructions, see the System Administrator Guide.

Xerox WorkCentre M123/M128/133

Xerox WorkCentre Pro 123/128/133

Quick Network Setup (Static IP)