Xerox 3600DN - Phaser B/W Laser Printer Panduan Konfigurasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Aksesori Printer Xerox 3600DN - Phaser B/W Laser Printer. Xerox 3600DN - Phaser B/W Laser Printer 6 halaman. Letter-size black-and-white laser printer
Juga untuk Xerox 3600DN - Phaser B/W Laser Printer: Manual Opsi (1 halaman), Panduan Instalasi (2 halaman), Surat Volatilitas (1 halaman), Panduan Penggunaan Cepat (2 halaman), Petunjuk Pemasangan (2 halaman), Panduan Cepat (2 halaman), Panduan Evaluator (17 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Instalasi (1 halaman), Panduan Peningkatan Firmware (1 halaman), Memperbarui (1 halaman), Brosur & Spesifikasi (4 halaman), Panduan Cepat (4 halaman)

The CentreWare Internet Services installation process is now completed.

Note:

If the Accounting feature is enabled, you may be required to enter a user ID and passcode

(if one is set up).

Note:

When your access to CentreWare Internet Services is encrypted, enter "https://" followed by

the Internet address, instead of "http://".

Note:

DHCP/DDNS: Release Registration – Allows DHCP resources to be released when the

machine is powering down. This is a display-only item and shows "Enabled".

IP Filtering

Overview

The IP Filtering is a security feature that allows you to control access to Internet Services. IP Filtering

allows you to prevent unauthorized access by TCP/IP (Transmission Control Protocol/Internet Protocol).

The IP Filtering feature provides security to the machine, by allowing you to register the IP addresses

permitted to communicate with the machine.

Enable IP Filtering

At your Workstation, open the web browser, enter the TCP/IP Address of the machine into the

Address bar.

Press [Enter].

Click on the [Properties] tab.

Click on the [Security] link.

Select [IP Filtering] in the directory tree.

For IPv6 Filtering

Checkmark the [IPv6 Filtering Enabled] box.

Enter the permittable IP Address(es) access to the device in the following IP Address table.

Enter the IPv6 address in form of CIDR convention. Prefix indicates the number of leftmost bits to

be referenced.

For example:

•

2001:DB8:1234:215:215:99FF:FE04:D345 / 128 is used to reference a complete address.

•

2001:DB8:1234:215:215:99FF:FE04:D345 / 64 is used to reference prefix address consisted

of leftmost 64 bits only.

•

2001:DB8:1234:215:215:99FF:: / 80 is used to reference prefix address consisted of leftmost

80 bits only.

Click on the [Apply] button to accept changes.

If prompted, enter the Administrator's User ID [admin] and Password [1111], and click on

[Login].

10. Click on [OK].

Configure IP Settings and IP Filtering

IPv6 Supplement