Xerox 5400DX - Phaser B/W Laser Printer Panduan Pemasangan Cepat - Halaman 21
Jelajahi secara online atau unduh pdf Panduan Pemasangan Cepat untuk Aksesori Printer Xerox 5400DX - Phaser B/W Laser Printer. Xerox 5400DX - Phaser B/W Laser Printer 40 halaman. 1000-sheet stacker
Juga untuk Xerox 5400DX - Phaser B/W Laser Printer: Petunjuk Teknis (5 halaman), Manual (11 halaman), Petunjuk Instalasi (2 halaman), Manual Kertas (2 halaman)
Halaman Cetak
24.
The Completing the Add Printer Wizard window appears. If all
the data presented is correct, click the Finish button. If not, click
the <Back button to correct any errors.
25.
Wait for the Test Print to print. A new dialog asks for
confirmation of the Test Print; click Yes.
26.
Send a print job to the printer.
27.
Check the print job for print-quality. If print-quality problems
exist, use the print-quality section of your printer's Advanced
Features and Troubleshooting Manual to correct the problem.
28.
If your print job did not print, see the Troubleshooting section for
your operating system in the Advanced Features and
Troubleshooting Manual to correct the problem.
Note
Printers connected to a Windows 2000 network with TCP/IP
protocol enabled, can use a web browser to monitor and
configure your printer. Refer to the section in this document
entitled Internet Printer Services.
Note
For installing or managing multiple printers on a Windows
2000 network with TCP/IP protocol enabled, you can use the
Xerox CentreWare MC snap-in to Microsoft Management
Console. Refer to the Xerox CentreWare MC User Guide.
Quick install steps (Xerox TCP/IP Port Monitor)
1.
Insert your printer's CD-ROM into your computer's CD-ROM
drive. If your PC is set to autorun, a CD Navigator Utility should
automatically start. If it does not start, then:
a.
Click Start and Run.
In the Run window, type: <CD drive>:\SETUP32.EXE.
b.
2.
Select your desired language from the available list.
Quick Network Install Guide
15