D o c u C o lo r 50 0 0 A dm i ni s t r at o r G u i de
6.
In the Decurler Profile Properties window:
a. You can give the Custom Decurler Profile a new name. In
this example we rename the Custom Decurler Profile to
Custom 1.
b. In the Decurler Profile Properties window, enter the
following values in the Single Paper Weight, 1 Sided: Face
Up fields:
• Since your job shows downward curl, you do not want to
use the Upward Decurler. As a result, in the Upward
fields you must enter values in descending order, or in
equal values less than 12% (the next value you will
enter). For this exercise we will use 0%, 0% and 0%.
• In the Downward 2 mm (Light curl) field enter 12%. This
means that all pages with a 0% through 12% image
density ratio, which includes the Dunn Report maximum
of 10.8%, are sent to the 2 mm downward Decurler path.
• In the Downward 6 mm (Medium curl) field, enter 30%.
This means that all pages with 13% to 30% image
density ratio, which includes the Tulips 28.8%, will be
sent to the 6 mm downward Decurler path.
• In the Downward 10 mm (Heavy curl) field, enter 50%.
Since none of your job pages have 31% through 50%
image density ratio, this Decurler will not be used.
NOTE: Entering 50% in the Downward 10 mm (Heavy curl) field
simply illustrates that entering any value at or above 30%
(maximum of 100%) results in the same outcome. Since none of
your job pages have an image density ratio above 30% the
Downward 10 mm Decurler will not be used.
The following screen shows how the values would be entered:
1. De c u r l er A dj u s tm en t
1-19