Xerox Phaser 4500 Brosur

Jelajahi secara online atau unduh pdf Brosur untuk Aksesori Printer Xerox Phaser 4500. Xerox Phaser 4500 1 halaman. Black-and-white laser printer
Juga untuk Xerox Phaser 4500: Panduan Referensi Cepat (10 halaman), Brosur (8 halaman), Manual Jaringan (8 halaman), Panduan Tambahan (2 halaman), Templat Aksesibilitas Produk Sukarela (11 halaman), Panduan Tambahan (5 halaman), Manual (9 halaman), Panduan Referensi Cepat (11 halaman), Setup Manual (2 halaman), Panduan Instalasi (28 halaman), Panduan Peningkatan (4 halaman), Panduan Pengguna (4 halaman), Panduan Referensi Cepat (11 halaman), Panduan Referensi Cepat (11 halaman), Panduan Cepat (3 halaman), Manual (5 halaman)

Halaman Cetak

Date: 6/31/2006

Subject: Volatility statement for Phaser 4500 series color printers

Phaser 4500 series printers do not retain any latent user image in the mechanical system of the printer during normal

operation. If a print job is disrupted prior to completion a latent image may exist in the mechanical systems of the

printer; the image may be removed by cycling power or printing a page.

Phaser 4500 series printers do not retain any latent image in the print controller (raster image processor) or

associated RAM following the completion of printing. No user data is maintained in the print controller or

associated RAM following the cycling of power.

Phaser 4500 series printers contain non-volatile flash memory contained on the controller. This memory does not

retain any variable printing data, but can be used to retain software updates, store fonts, etc.. No user information is

retained in this memory.

Phaser 4500 series printers equipped with an optional hard disk drives will retain latent images in the optional hard

disk and type face information in the font DIMM.

The chart below shows the corresponding memory types for the Xerox Phaser 4500 printer. Please note there are no

remnants of customer print data retained in the printer when the optional Hard Disk Drive and/or Font DIMM is

removed and (ii) the power is turned off.

Model Number

4500/B/N/DT

4500/DX

Notes:

SDRAM memory can be upgraded to 512MB for all models

Contains printer configuration and operational parameters. It does not contain user print data.

Is used for firmware code and contains no user print data.

Hard drive and Font DIMM may contain user print data and is an option for all printer models.

Xerox Corporation

Office Printing Business

26600 SW Parkway

P.O. Box 1000 M/S 7060-630

Wilsonville, OR 97070

Memory Type

SDRAM

EEPROM

Configuration Card

CRUM

Flash / ROM

Hard Disk (Optional)

Font DIMM (Optional)

SDRAM

EEPROM

Configuration Card

CRUM

Flash / ROM

Hard Disk (Standard)

Font DIMM (Optional)

Volatility

User Data

Volatile

Non-Volatile

Non-volatile

Volatile

Non-Volatile

Yes