Xerox Phaser 5500 series Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Printer Xerox Phaser 5500 series. Xerox Phaser 5500 series 2 halaman. Postcards
Juga untuk Xerox Phaser 5500 series: Panduan Tambahan (2 halaman), Setup Manual (2 halaman), Panduan Tambahan (9 halaman), Panduan Referensi Cepat (9 halaman), Manual (39 halaman), Manuallines (3 halaman), Lembar Instruksi (8 halaman), Lembar Instruksi (5 halaman), Lembar Instruksi (3 halaman), Panduan Pengemasan Ulang (3 halaman), Lembar Instruksi (2 halaman), Lembar Instruksi (2 halaman), Lembar Instruksi (2 halaman), Lembar Instruksi (2 halaman), Lembar Instruksi (2 halaman), Lembar Instruksi (2 halaman), Manual (2 halaman), Lembar Instruksi (1 halaman), Lembar Instruksi (1 halaman), Panduan Evaluator (13 halaman), Panduan Evaluator (16 halaman), Panduan Pemeliharaan (50 halaman), Pemeliharaan (1 halaman), Panduan Pengguna (3 halaman), Panduan Referensi Cepat (9 halaman), Panduan Memulai Cepat (2 halaman)

Xerox Phaser 5500 series Panduan Pengguna
Insert Small US postcards short-edge feed and facedown into Tray 1 (MPT) only.
Place the top of the postcard toward the rear of the printer.
Envelope Tray
Insert Large US and A6 postcards long-edge feed and faceup into the optional
Envelope Tray. Place the top of the postcard toward the left of the tray.
2.
Adjust the paper guides to the size of the postcards.
3.
If prompted at the printer's front panel, press the OK button to accept the paper size and
type that are highlighted. If you have changed the paper size or type, do the following:
a.
Select Change, then press the OK button.
b.
Select
Card
Stock, then press the OK button.
c.
Select the paper size, then press the OK button to save your selection.
4.
In the printer driver, select Card Stock as the paper type or Tray 2 as the paper source.
Phaser® 5500 Laser Printer
2-53
5500-257
5500-278
Postcards