Calex Thermosight GL Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur Calex Thermosight GL. Calex Thermosight GL 19 halaman. Hand held infrared pyrometer

Halaman Cetak

The starting temperature is set new every time the trigger is pulled. The large

display now shows the current temperature, and on the small display is shown

the difference between the starting temperature value and the current

temperature. This function can be changed by pressing the " PAR" key again.

3.6.5. Acoustic alarm

High Alarm limit

800

The alarm limit temperature can be set in steps of 1°C or 1°F. The high alarm

is signaled by a high intermittent tone.

If the temperature exceeds the instrument`s range limits ( 1800°C /3272°F),

the tone`s intermission will become shorter.

3.6.7. Data transfer

The infrared thermometer has a serial RS-232-interface. The interface is

connected via a four pole USB-Socket Type B, and the appropriate cables.

The pin code of the RS-232-interface cable is:

1 - open

2 - RxD

3 - TxD

4 - open

5 - GND

The data transfer has a baud rate of 9600 Baud. The format is:

8 data bits, even parity, 1 stop bit

800

1800

6 - open

7 - open

8 - open

9 - open

800

1200