Xerox 4800 Series Instalasi dan Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Pemindai Xerox 4800 Series. Xerox 4800 Series 46 halaman. Xerox one touch scanner installation and user guide 4800, 2400
Halaman Cetak
If the scanner is not properly connected
4800/2400 Series Installation and User Guide
To check the status of the scanner:
1.
Right-click the scanner icon.
The shortcut menu appears.
Figure 1-8 Shortcut menu
2.
Choose [About] from the shortcut menu.
A dialog box confirms that the scanner is properly connected.
Figure 1-9 Scanner information
3.
Click [OK] to close the dialog box. Your scanner is ready to
scan.
If the scanner icon on the Windows taskbar has a red "X" through it,
the scanner is not properly connected.
Figure 1-10 Scanner is not connected
Check for one of these possible problems:
•
Is a cable loose or not plugged in securely? Inspect all cable
connections. Make sure all the cables are plugged in securely.
•
Is the scanner's locking tab in the locked position? Slide the
locking tab to the unlocked position. If you tried to scan with
the scanner locked, you must restart your computer after
unlocking the scanner.
•
Did you restart the computer after installing the software? If
you didn't restart the computer, it may not have loaded all of
the software files. Try restarting your computer.
Getting started with your new scanner
1-5