Xerox 665 Catatan Rilis - Halaman 10

Jelajahi secara online atau unduh pdf Catatan Rilis untuk Pemindai Xerox 665. Xerox 665 14 halaman. Customer software release supplement

Halaman Cetak

INTS AND

IPS

Table 2-1. FreeFlow Scanner 665 Hints and Tips

Feature/Function

Low resolution

scanning of text

Original Types /

Image File Sizes

Second-side show-

through when

scanning from the

platen

Scanner Support

Image registration

"Help"

Electronic Page

Deskew

2-4

Hints/Tips

Scanning text printed in 10pt font or less at resolutions of 100 dpi or less

will result in image content that may be difficult to discern. These low-

resolution selections are typically used for generating thumbnails. If better

readability is desired, resolutions of 200 dpi of higher should be used.

Originals scanned using incorrect "Original Type" selection (scanning a

halftone in "Photograph" mode, for example) can yield image file sizes that

are significantly larger than the resultant file size scanned in the correct

"Original type".

Originals with a large amount of dark content on the reverse side of a page,

may exhibit more "show-through" in the resulting scanned image than if

scanned through the document feeder. If show-through is a problem, place

a black piece of paper on top of the original being scanned from the platen.

A stronger "background suppression" setting may also help in removing

unwanted show-through.

Unpredictable behavior can result if the scanner diagnostic software

("Scanner Support" application) is invoked while the scanner is booting.

The application should be run with the scanner fully powered off, or fully

powered on.

If scanned images repeatedly contain thin, black lines on the edge of the

image, run the "Setup Registration" routine in the "Scanner Support"

application to re-set the scanner's registration.

The following information in "Help" about "Scan Tickets" is incorrect:

1. Within the Twain GUI, go to the Help menu and then the Index —>

Scan Tickets.

2. Choose the "Backing up your scan ticket tiles" option.

3. Part 2 reads: Select [Start: Programs: Windows Explorer] - with

Windows XP, it should read [Start: Programs: Accessories: Window

Explorer].

4. Part 3 reads: "Browse to C:\winnt\Twain_32\Xerox665s\international" -

with Windows XP, it should read "C:\Program Files\Common

Files\Xerox\Scanner".

The following information in "Help" on "Scanner Specifications" is incorrect:

1. Within the Twain GUI go to Help --> Index --> Scanner Quick

Reference --> Document Feeder --> Scanner Specifications.

2. Note that under the Minimum paper dimensions reads 6.5 x 5.5 inches,

long edge feed — this should read short edge feed.

3. Under document Feeder --> Color Spaces & resolutions supported

Binary B/W reads 76 - 1200 dpi — should read 72, 75, 96, 100, 120,

150, 200, 240, 300, 400, 600, 1200 dpi.

Although the "Electronic Page Deskew" (Options: Preferences) is enabled

when scanning from the platen or the feeder, it is only functional when

scanning from the feeder.

EROX

REE

USTOMER

OFTWARE

665

LOW

CANNER

ELEASE

UPPLEMENT