Xerox DocuColor 240 Catatan Rilis - Halaman 11

Jelajahi secara online atau unduh pdf Catatan Rilis untuk Pemindai Xerox DocuColor 240. Xerox DocuColor 240 34 halaman. Printer-copier
Juga untuk Xerox DocuColor 240: Panduan Memulai Cepat (47 halaman), Instal Manual (2 halaman), Panduan Memulai Cepat (2 halaman), Manual Penggantian Perangkat Keras (2 halaman), Manual Pengaturan (6 halaman), Pembuatan Buklet Untuk Fotokopi (2 halaman), Daftar Pengaturan Sistem (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Evaluator (20 halaman), Panduan Evaluator (18 halaman)

Halaman Cetak
Xerox DocuColor 240 Catatan Rilis
9 Click OK to close the Properties window.
10 Set the number of copies.
11 Click OK to submit the job for printing.
Printing a booklet from Mac OS X v10.4
On Mac OS X v10.4, the printer driver constrains some selections if an incompatible setting
is selected. For example, you cannot select any Booklet Maker settings unless you first set the
Duplex option to Top-Top.
Booklet printing requires that a finisher is installed on the copier and that the printer driver is
configured with the installed finisher. For information about configuring installable options,
see Printing from Mac OS.
The following procedure explains how to set the correct print options for printing an 8.5
document as a booklet on 11
paper, using the Mac OS X v10.4 printer driver.
T
O PRINT A BOOKLET FROM
1 Open the document in its application.
2 Select File > Page Setup.
3 Choose the Fiery as your printer, set the Paper Size to 8.5x11 SEF (A4 SEF), and click OK.
4 Select File >Print.
5 Choose the Fiery as your printer, and then choose Printer Features from the drop-down list.
6 Choose Paper Source 2 from the Feature Sets list.
7 Set Print Size to 11x17 SEF (A3 SEF).
8 Choose Finishing 1 from the Feature Sets list.
9 Set Duplex to Top-Top.
10 Choose Finishing 2 from the Feature Sets list.
11 Set Fasten Mode to Fold or Fold and Staple.
For the limitations on folding and stapling, see "Fasten Mode" on page 12.
12 Choose Finishing 4 from the Feature Sets list.
13 Set Face-Down Printing to Face up.
14 Choose Finishing 1 from the Feature Sets list.
15 Set Booklet Maker to Saddle.
16 Choose Finishing 3 from the Feature Sets list.
17 paper, or for printing an A4 document as a booklet on A3
x
M
OS X
10.4
AC
V
Page 11
11
x
Part Number: 45045321