ALDEN OneLight 65 SSC Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Radar Kelautan ALDEN OneLight 65 SSC. ALDEN OneLight 65 SSC 12 halaman. Automatic satellite system with ssc unit

1
2
N° : description
1 : IR
2 : LNB in
3 : Out to demo
4 : Data
5 : Motor
6 : Contact
7 : 10-15V DC
Reminder :
• The system must be in a vertical position in a well ventilated space.
• Do not use existing coaxial circuits. The quality of the picture can be affected.
• Each link will weaken the signal.
• Cables of a different type can also change the quality of the picture.
• In any case, even when initial cables have been put in:
- A direct line (no links) with a 5A fuse must go from the unit to the battery for the + wire.
- A direct line (no links) must go from the unit to the battery for the - wire.
- A direct line (no links) with a 5A fuse must go from the unit to the "+ after ignition" located
on the ignition key or on the main unit.
• Never use the "+ after ignition" on the fridge, the steps or the battery separator.
• You must always use the cables that are provided.
• The warranty will no longer be applicable if these instructions are not followed.
SSC connection layout
3
Type of connection
RJ-11
Coaxiale type F
Coaxiale type F
RJ-45
Power
Cosse
Jack
Onelight with SSC unit - User's guide - 070117 - 9
4
5
Description of inputs / outputs
Infrared control. A remote sensor is delivered with
the remote control (in option).
Connection with the LNB from the antenna.
Connection used between the unit and the receiver.
Used to transfer the updating data.
Used for the motorization of the satellite system.
Safety device : will fold the antenna and is
connected to the vehicle ignition.
Main supply.