Xerox WorkCentre 6400 Manual Informasi - Halaman 13

Jelajahi secara online atau unduh pdf Manual Informasi untuk Pemindai Xerox WorkCentre 6400. Xerox WorkCentre 6400 44 halaman. Color multifunction printer
Juga untuk Xerox WorkCentre 6400: Fitur (1 halaman), Spesifikasi (1 halaman), Panduan Penggunaan Cepat (17 halaman), Panduan Evaluator (25 halaman), Panduan Instalasi (2 halaman), Panduan Konfigurasi (12 halaman), Panduan Evaluator (24 halaman), Panduan Penggunaan Cepat (17 halaman), Panduan Penggunaan Cepat (16 halaman), Panduan Penggunaan Cepat (16 halaman), Manual (32 halaman)

Halaman Cetak
Xerox WorkCentre 6400 Manual Informasi
Volatile Memory Description
Type (SRAM, DRAM, etc)
SRAM within the FPGA
Additional Information:
All memory listed above contains code for execution and configuration information. No user or job data is permanently stored in this location.
Non-Volatile Memory Description
Type (Flash, EEPROM, etc)
Flash ROM
Additional Information:
All memory listed above contains code for execution and configuration information. No user or job data is stored in this location.
2.6. Marking Engine (also known as the Image
Output Terminal or IOT)

2.6.1. Purpose

The Marking Engine performs copy/print paper feeding and transport, image marking and fusing, and document
finishing. Images are not stored at any point in these subsystems.

2.6.2. Hardware

The marking engine is comprised of paper supply trays and feeders, paper transport, laser scanner, xerographics, and
paper output and finishing. The marking engine contains a CPU, BIOS, RAM and Non-Volatile Memory.
Volatile Memory Description
Type (SRAM, DRAM, etc)
SRAM
Additional Information:
All memory listed above contains code for execution and configuration information. No user or job data is permanently stored in these
locations.
Ver. 1.00, May 2010
XEROX WorkCentre 6400 Information Assurance Disclosure Paper
Size
User Modifiable
(Y/N)
87KB
N
Size
User Modifiable
(Y/N)
128KB
via Diagnostics
Size
User Modifiable
(Y/N)
31KB
N
Function or Use
Display logic, data buffers
Function or Use
Configuration data for the FPGA
Function or Use
Executable code, control data
13
Process to Clear:
Power Off System
Process to Clear:
Diagnostic
Process to Clear:
Power Off System
Page 13 of 44