Xerox 6100BD - Phaser Color Laser Printer Panduan Instalasi - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perangkat lunak Xerox 6100BD - Phaser Color Laser Printer. Xerox 6100BD - Phaser Color Laser Printer 34 halaman. Disk overwrite installation and usage
Juga untuk Xerox 6100BD - Phaser Color Laser Printer: Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Brosur & Spesifikasi (4 halaman), Panduan Pengguna (28 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Instal Manual (2 halaman), Catatan Rilis (2 halaman), Panduan Memulai (37 halaman), Manual (34 halaman), Manual (34 halaman), Panduan Memulai (34 halaman), Panduan Pengguna (32 halaman), Manual (11 halaman), Panduan Instalasi dan Pengoperasian (8 halaman)

Xerox 6100BD - Phaser Color Laser Printer Panduan Instalasi
FREEFLOW PRINT SERVER 6.0.xx

W-8: AppleTalk Gateway installation worksheet

24
If the customer has purchased the AppleTalk Connectivity —
Apple PAP gateway, fill out this worksheet.
Item #
Data Element
1
AppleTalk Phase Type
2
AppleTalk Zone Name
W-8 data element definitions
AppleTalk Phase Type: There are three AppleTalk Phase
Types:
You can determine which EtherTalk phase type is running by
completing the following steps:
1. Select the Control panel from the Apple Menu Icon (upper
2. Double-click the Network icon.
3. The icon describes the phase type:
Phase 1 (non-extended network) is a single physical
network that can support up to 254 mode addresses
(devices). There is only one network number and one zone
assigned to the network.
Phase 1 is not configured as Phase 1, but should follow the
Transition mode install procedure. This is done so that
Macintosh Transparent Printing can be enabled.
Phase 2 (extended network) is a network in which there are
two or more network numbers assigned to a single physical
network. Each network number on an extended network is
an addressing channel that can support 253 devices and
only one zone name. Phase 2 routers can be configured to
support non-extended networks.
Transition mode (Phase 2 Transition) is a way of
configuring a Phase 2 router so that it can function on an
Internet that includes Phase 1 routers. Since Phase 1
routers cannot recognize multiple network numbers or
multiple zones on a network, a Phase 2 router in the
transition mode is deliberately limited to addressing only 253
devices.
left corner of the screen on a Macintosh).
a. An icon showing two single opposing arrows represents
EtherTalk 1.0 (Phase 1).
b. An icon showing two double opposing arrows
represents EtherTalk 2.0 (Phase 2).
GETTING READY FOR THE PRINT SERVER INSTALLATION
Customer Value
XEROX FREEFLOW PRINT SERVER