Xerox 6180N - Phaser Color Laser Printer Panduan Instalasi - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perangkat lunak Xerox 6180N - Phaser Color Laser Printer. Xerox 6180N - Phaser Color Laser Printer 34 halaman. Color laser printer
Juga untuk Xerox 6180N - Phaser Color Laser Printer: Lembar Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Panduan Pengguna (28 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Catatan Rilis (2 halaman), Instal Manual (2 halaman), Panduan Memulai (37 halaman), Manual (34 halaman), Manual (34 halaman), Panduan Memulai (34 halaman), Panduan Pengguna (32 halaman), Panduan Instalasi dan Pengoperasian (8 halaman), Panduan Evaluator (16 halaman), Spesifikasi (4 halaman)

FREEFLOW PRINT SERVER 6.0.xx

W-8: AppleTalk Gateway installation worksheet

If the customer has purchased the AppleTalk Connectivity —

Apple PAP gateway, fill out this worksheet.

Item #

Data Element

AppleTalk Phase Type

AppleTalk Zone Name

W-8 data element definitions

AppleTalk Phase Type: There are three AppleTalk Phase

Types:

•

You can determine which EtherTalk phase type is running by

completing the following steps:

1. Select the Control panel from the Apple Menu Icon (upper

2. Double-click the Network icon.

3. The icon describes the phase type:

Phase 1 (non-extended network) is a single physical

network that can support up to 254 mode addresses

(devices). There is only one network number and one zone

assigned to the network.

Phase 1 is not configured as Phase 1, but should follow the

Transition mode install procedure. This is done so that

Macintosh Transparent Printing can be enabled.

Phase 2 (extended network) is a network in which there are

two or more network numbers assigned to a single physical

network. Each network number on an extended network is

an addressing channel that can support 253 devices and

only one zone name. Phase 2 routers can be configured to

support non-extended networks.

Transition mode (Phase 2 Transition) is a way of

configuring a Phase 2 router so that it can function on an

Internet that includes Phase 1 routers. Since Phase 1

routers cannot recognize multiple network numbers or

multiple zones on a network, a Phase 2 router in the

transition mode is deliberately limited to addressing only 253

devices.

left corner of the screen on a Macintosh).

a. An icon showing two single opposing arrows represents

EtherTalk 1.0 (Phase 1).

b. An icon showing two double opposing arrows

represents EtherTalk 2.0 (Phase 2).

GETTING READY FOR THE PRINT SERVER INSTALLATION

Customer Value

XEROX FREEFLOW PRINT SERVER