Xerox 6180N - Phaser Color Laser Printer Manual Keamanan - Halaman 17

Jelajahi secara online atau unduh pdf Manual Keamanan untuk Perangkat lunak Xerox 6180N - Phaser Color Laser Printer. Xerox 6180N - Phaser Color Laser Printer 38 halaman. Color laser printer
Juga untuk Xerox 6180N - Phaser Color Laser Printer: Panduan Instalasi (34 halaman), Lembar Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Panduan Pengguna (28 halaman), Instal Manual (2 halaman), Catatan Rilis (2 halaman), Instal Manual (2 halaman), Panduan Memulai (37 halaman), Manual (34 halaman), Manual (34 halaman), Panduan Memulai (34 halaman), Panduan Pengguna (32 halaman), Panduan Instalasi dan Pengoperasian (8 halaman), Panduan Evaluator (16 halaman), Spesifikasi (4 halaman)

Security warning banners

Security Guide

Security warning banners are displayed when a user logs in or

telnets into the Xerox FreeFlow Print Server. This message

explains that only authorized users should be using the system

and that any others face the possibility of being monitored by law

enforcement officials.

NOTE: DRW (Xerox FreeFlow Print Server Remote Workflow) is

not impacted by security settings.

You can choose to disable anonymous printing on all existing LP

printer queues that are associated with the Xerox FreeFlow Print

Server virtual printers. When anonymous LP is disabled, only

systems that have their IP address in the Xerox FreeFlow Print

Server controller /etc/hosts table are authorized to submit LP

requests. Answer "y" for yes to disable this printing option.

If you are using the legacy Xerox print command line client (the

software is not distributed with this release), you will need to use

the remote shell internet service to transfer files to the Xerox

FreeFlow Print Server controller. However, if you are not using the

Xerox print command line client, it is strongly recommended that

the remote shell internet service is disabled. When these three

questions are answered, all remaining aspects of the "High"

security setting are implemented.

These options allow for temporary enabling and disabling FTP

alone. Will not persist through reboots. You must have FTP

enabled when using a Continuous Feed system, or FreeFlow®

Production Print and NetAgent.

FTP is also required for the Call for Assistance (CFA) feature. This

uses FTP to push IOT logs and a Xerox FreeFlow Print Server

outload back to the Print Server controller.

NOTE: Temporarily enable FTP through the Xerox FreeFlow Print

Server Setup > FTP/Remote Diagnostics menu option.