Xerox 850DP - Phaser Color Solid Ink Printer Panduan Operator - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Operator untuk Perangkat lunak Xerox 850DP - Phaser Color Solid Ink Printer. Xerox 850DP - Phaser Color Solid Ink Printer 16 halaman. Installation guide for accxes 10.2
Juga untuk Xerox 850DP - Phaser Color Solid Ink Printer: Spesifikasi (2 halaman), Panduan Tambahan (1 halaman), Panduan Tambahan (11 halaman), Setup Manual (1 halaman), Panduan Petunjuk Pembersihan (9 halaman), Panduan Peningkatan (8 halaman), Panduan Tambahan (26 halaman), Catatan Rilis (33 halaman), Catatan Rilis (11 halaman), Catatan Rilis (11 halaman), Petunjuk Instalasi (2 halaman)

100 lbs. (45.5 kg)

37.9 inches (963 mm)

52.8 inches (1341 mm)

44.6 inches (1133 mm)

Bond (20 lb.)

Vellum (20 lb.)

Film (4 mil.)

Tracing (4 mil)

Roll Feed - 11 inches to 36 inches (279.4 mm to 914.4 mm)

width 3 inches (76.2 mm) core diameter to 6.7 inches (170.2

mm) O.D.)

Stacker 1000 Operator Manual

Technical data

Maximum of 1000 prints of various sizes

Maximum of 750 D-size (A1) prints

Maximum of 375 E-size (A0) prints

85-264 VAC

47-440 Hz

0 Amps

0.8 Amps (115 VAC) for USA and Canada

0.5 Amps (250 VAC) for EO

The stacker is designed to operate either on a 15 A (115

VAC), 60 Hz for the USA and Canada or on a 20 A (240

VAC), 50 Hz for EO, single phase line with a circuit

breaker. A standard 15A or 20A, three-prong, grounded

receptacle is required.