Xerox 850N - Phaser Color Solid Ink Printer Panduan Tambahan - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Tambahan untuk Perangkat lunak Xerox 850N - Phaser Color Solid Ink Printer. Xerox 850N - Phaser Color Solid Ink Printer 26 halaman. Installation guide for accxes 10.2
Juga untuk Xerox 850N - Phaser Color Solid Ink Printer: Spesifikasi (2 halaman), Panduan Operator (16 halaman), Panduan Tambahan (1 halaman), Panduan Tambahan (11 halaman), Setup Manual (1 halaman), Panduan Petunjuk Pembersihan (9 halaman), Panduan Peningkatan (8 halaman), Catatan Rilis (33 halaman), Catatan Rilis (11 halaman), Catatan Rilis (11 halaman), Petunjuk Instalasi (2 halaman)

Halaman Cetak
Xerox 850N - Phaser Color Solid Ink Printer Panduan Tambahan
XES Synergix 8825/8830/8855 Digital Solution Folding Supplement

Title Block Position Solutions Chart

Typically, print jobs that consist of files that are standard drawing sizes, printed on standard media sizes available in the printer will be folded with the title block
visible on the folded package. If there is a problem getting the title block positioned as desired, refer to the Chart and begin with Solution 1 to try and isolate the
problem.
Solutions
•
1
Verify Folder is
capable of making
If the style is available, continue with Solution 2. If a style is not available, the desired fold is non-conforming and cannot be
folded.
the desired fold
.
•
2
Verify that the Fold
If enabled, continue with Solution 3. If not enabled, load the Fold Style program and run the print job again. Loading the program
Style program is
may require that the printer and controller be switched off then on (rebooted) or Service be called.
enabled on the
Folder.
•
3
•
Verify that the
media loaded in the
Run the print job again. If the job is incorrect, continue with Solution 4.
Printer will allow the
desired Fold Style
to be folded.
AccXES Client Tools
Reference the User Documentation provided with the Folder and check that a Fold Style is available that will position the title
block in the desired position.
At the Folder Operator Control Panel, check that the desired Fold Style program is enabled.
Check that the media series (ARCH, ANSI, or ISO) in the printer match the available Fold Styles and or Folder Type.
Load the standard width media rolls in the printer for the media series being used.
Windows Optimized
HP-GL/2 Driver
Web PMT
(95/98/NT 4.0/2000)
8
Postscript Driver