Xerox DocuPrint P8EX Catatan Rilis - Halaman 20

Jelajahi secara online atau unduh pdf Catatan Rilis untuk Perangkat lunak Xerox DocuPrint P8EX. Xerox DocuPrint P8EX 26 halaman. Personal laser printer
Juga untuk Xerox DocuPrint P8EX: Brosur & Spesifikasi (2 halaman), Prosedur Pembersihan (2 halaman), Panduan Memulai (40 halaman), Petunjuk Pengoperasian (1 halaman), Panduan Pengguna (25 halaman), Manual (13 halaman), Pemberitahuan (1 halaman), Brosur & Spesifikasi (2 halaman), Panduan Pengguna (25 halaman)

Choosing a System Disk for Operations

Do not perform any operations, such as archiving, on disk C. Perform these operations on disk

It is recommended not to work with Creo Spot Colors XT version 2.3.1XTension when you use

QuarkXPress.

When you use Creo APR in the Spire CXP8000 color server make sure that the OPI XTension in

QuarkXPress is not active. Alternatively, in the Settings window > Preferences > General

Defaults, clear the Enable OPI Spire Support check box.

Printing an Area of 12 × 18 inches

Use paper that is 12.6 × 19.2 inches to print a full print area of 12 × 18 inches.

To connect to the Spire CXP8000 color server from a Macintosh client workstation, use the

Spire CXP8000 color server IP address. You can obtain the IP address from the Spire CXP8000

by clicking on the DFE Monitor > Network tab.

The Web Viewer runs only on Explorer 5.0 browsers and higher and is suitable for both

Macintosh and Windows platforms.

If a job that contains shades of blue does not print to your satisfaction—for example, the blue

shades appear too purple—use the predefined SpireDC8000_COM destination profile, and then

use the required emulation.

739-00031A-EN