Xerox FreeFlow Manual Prosedur Operator - Halaman 16

Jelajahi secara online atau unduh pdf Manual Prosedur Operator untuk Perangkat lunak Xerox FreeFlow. Xerox FreeFlow 28 halaman. For color 560/570 printer
Juga untuk Xerox FreeFlow: Panduan Instalasi (34 halaman), Brosur (2 halaman), Catatan Rilis (23 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Catatan Rilis (33 halaman), Informasi Instalasi Penting (2 halaman), Panduan Pengguna (50 halaman), Manual (18 halaman), Panduan Hubungkan Cepat (2 halaman)

Xerox FreeFlow Print Server for Color 560/570 Print Server

Installation

2.2.32 ①Find the IOT Interface cable, which is packed in the larger

flat box inside the Xerox FreeFlow Print Server box. ②Remove the

IOT Interface Cable from the plastic bag.

2.2.33 Plug one end of the IOT Interface Cable into the Aria PWB in

slot PCIe1 on the back of the Xerox FreeFlow Print Server. This is on

the left side of the back of the server.

2.2.34 Plug the other end of the IOT Interface Cable into the

corresponding slot on the Print Engine.

2.2.35 This system can come with one of two switches. If the DFE is

packed with the Cisco SD2005 5-port switch (110K21320), jump to

Step 2.2.36. If the DFE is packed with the Black Box 5-port USB-

powered switch (110K21340), jump to Step 2.2.56.

2-10

Carrier Procedure Manual