Xerox FREEFLOW 701P47393 Panduan Pengguna - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Xerox FREEFLOW 701P47393. Xerox FREEFLOW 701P47393 32 halaman. Xerox printer user manual
Halaman CetakHow can I customize application preferences?
Customize settings for data capture and transfer
8
•
Automatic Synchronization with Xerox Support Server
is enabled by default.
•
You can enter or edit the Print Engine Serial Number.
NOTE: Changing the serial number is not recommended, and
should only be performed in special cases by the CSE or if
Xerox specifically asks for the change to occur.
3. Click [Apply New Settings].
Or, click Restore Settings if you do not want to modify the
capture settings and you want to restore the settings that were
saved last.
The [Problem Reporting: Settings] page has an option that you
can select to automatically delete captured data after it is
transferred.
To specify settings for captured files
1. Select [Home: Problem Reporting: Settings].
2. Select the Capture tab.
3. If you want to delete the captured files from your system after
they are transferred to Xerox, check the [Remove Capture
Data after Transfer] checkbox. This eliminates the redundant
storage of the files on your system. Or if you want to save the
captured files clear the checkbox.
4. Enable Job Data Capture is enabled by default. If the
selection box is not marked, the Job and Machine & Job data
types cannot be selected on the Capture or Capture &
Transfer pages. To disable this feature, remove the mark from
the checkbox.
5. Note the directory location of the captured files. This field is
read-only. You can verify this location when you select files to
transfer to Xerox.
6. Click [Apply New Settings] to save the settings.
Or, click [Restore Settings] if you do not want to modify the
capture settings and you want to restore the settings that were
saved last.
To specify options for transferring data files
1. Select [Home: Problem Reporting: Settings].
2. Select the Transfer tab.
User Guide