Xerox Nuvera 100 Panduan Pengoperasian - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Perangkat lunak Xerox Nuvera 100. Xerox Nuvera 100 34 halaman. Production system
Juga untuk Xerox Nuvera 100: Lembar Spesifikasi (2 halaman), Panduan Fitur (34 halaman), Manual Perencanaan (22 halaman), Panduan Pengguna (40 halaman), Panduan Referensi (2 halaman), Manual Perencanaan (20 halaman), Panduan Referensi (42 halaman), Referensi Cepat (2 halaman), Instal Manual (2 halaman), Panduan Tambahan (48 halaman), Manual Perencanaan (38 halaman), Manual Perencanaan (16 halaman), Panduan Referensi (2 halaman), Spesifikasi (2 halaman), Panduan Petunjuk dan Tips (18 halaman), Panduan Petunjuk dan Tips (18 halaman), Panduan Memulai (26 halaman), Panduan Memulai (30 halaman)

Halaman Cetak
Xerox Nuvera 100 Panduan Pengoperasian

About this guide

Contents

Conventions

NPS/IPS Extension Operations Guide

Introduction

This document provides all the information you need to install, set
up, and operate the NPS/IPS Extension option on the DocuPrint
100/115/135/155/180 EPS. It also describes the procedure for
switching between operating modes and provides troubleshooting
information. This document is intended for the site system
administrator who is responsible for installing and setting up the
NPS/IPS Extension option, and for the Operator who is
responsible for the day-to-day operations.
Before using this documentation, become familiar with its contents
and conventions.
This guide contains the following:
•
Chapter 1, "Product overview," provides detailed explanations
of the NPS/IPS Extension option.
•
Chapter 2, "Installation planning," gives you the information
that you need to prepare for installation of the NPS/IPS
Extension software.
•
Chapter 3, "Changing print modes," provides procedures for
switching between EPS, and NPS/IPS operating systems.
•
Chapter 4, "Problem solving," provides troubleshooting
information about switching between print modes.
•
An index is provided at the end of this document.
This guide uses the following conventions:
•
Initial capital and angle brackets: Within procedures, the
names of keys are shown with an initial capital and within
angle brackets (for example, press <Enter>).
•
Angle brackets: Variable information, or the position of a
specified argument in the command syntax, appears in angle
ix