Xerox Nuvera 100 Panduan Memulai - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Perangkat lunak Xerox Nuvera 100. Xerox Nuvera 100 26 halaman. Production system
Juga untuk Xerox Nuvera 100: Lembar Spesifikasi (2 halaman), Panduan Fitur (34 halaman), Manual Perencanaan (22 halaman), Panduan Pengguna (40 halaman), Panduan Pengoperasian (34 halaman), Panduan Referensi (2 halaman), Manual Perencanaan (20 halaman), Panduan Referensi (42 halaman), Referensi Cepat (2 halaman), Instal Manual (2 halaman), Panduan Tambahan (48 halaman), Manual Perencanaan (38 halaman), Manual Perencanaan (16 halaman), Panduan Referensi (2 halaman), Spesifikasi (2 halaman), Panduan Petunjuk dan Tips (18 halaman), Panduan Petunjuk dan Tips (18 halaman), Panduan Memulai (30 halaman)

Emergency Power Off

Electrical Supply

Disconnect device

Xerox Nuvera Getting Started Guide

Do not place the Xerox Nuvera Printer where people may step or trip

on the power cord. Do not place objects on the power cord.

Do not override or disable electrical or mechanical interlocks.

Do not obstruct the ventilation openings. These openings prevent

overheating of the machine.

Never push objects of any kind into slots or openings on this

equipment. Making a contact with a voltage point or shorting out a

part may result in fire or electrical shock.

If any of the following conditions occur, immediately switch off the

power to the machine and disconnect the power cord from the

electrical outlet. Call an authorized Xerox service representative to

correct the problem.

The machine emits unusual noises or odors.

The power cord is damaged or frayed.

A wall panel circuit breaker, fuse, or other safety device is tripped.

Liquid is spilled into the Xerox Nuvera Printer.

The machine is exposed to water.

Any part of the machine is damaged.

This product shall be operated from the type of electrical supply

indicted on the product's data plate label. If you are not sure that your

electrical supply meets the requirements, please consult a licensed

electrician for advice.

: This equipment must be connected to a protective earth

WARNING

circuit. This equipment is supplied with a plug that has a protective

earth pin. This plug will only fit into an earthed electrical outlet. This is

a safety feature. If you are unable to insert the plug into the outlet,

contact a licensed electrician to replace the outlet.

Always connect equipment to a correctly grounded power outlet. If in

doubt, have the outlet checked by a qualified electrician.

The power cable is the disconnect device for this equipment and is

attached to the back of the machine as a plug-in device. To remove all

electrical power from the machine, disconnect the power cable from

the electrical outlet.