Xerox Phaser 6100DN Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Xerox Phaser 6100DN. Xerox Phaser 6100DN 28 halaman. Disk overwrite installation and usage
Juga untuk Xerox Phaser 6100DN: Panduan Instalasi (34 halaman), Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Brosur & Spesifikasi (4 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Instal Manual (2 halaman), Catatan Rilis (2 halaman), Panduan Memulai (37 halaman), Manual (34 halaman), Manual (34 halaman), Panduan Memulai (34 halaman), Panduan Pengguna (32 halaman), Panduan Instalasi dan Pengoperasian (8 halaman)

Halaman Cetak

Defining the DocuSP IPDS queue

Managing the print queue

Xerox DocuSP IPDS User Guide

A queue specifically for processing the IPDS data must be created on

the DocuSP. The queue must be defined as a streaming queue.

Refer to the DocuSP on-line help for details on creating a streaming

queue.

Although DocuSP supports spooling jobs, as well as streaming for

other Printer Defined Languages (PDLs), only streaming is supported

for IPDS. You must select a streaming printer queue in the IPS

Manager to be used for IPDS printing. A streaming queue processes

and prints pages as they are received, which results in minimal delay

between the time the job is submitted and when printing begins.

Streaming is more reliable for IPDS job recovery.

Only one streaming queue can be active on the DocuSP at a given

time. If a user attempts to submit an IPDS job while another streaming

job is processing, DocuSP tries to start the job at periodic intervals.

The retry attempts continue until the other job completes. The

DocuSP UI does not indicate that retries are in progress or that a new

IPDS job is waiting to print. If a non-IPDS spooling job is in progress

when an IPDS job is received, the IPDS job starts processing

automatically once all previously queued spooled jobs are complete.

The DocuSP IPDS data streams processed by the IPS Manager are

sent to the IPDS print queue. Use the Queue Manager to view and

manage the queue properties applied to jobs. The IPDS tab on the

Queue Manager dialog may be used to set the resolution of the print

data supplied to the print engine. Values of 300 or 600 dpi may be

selected.

While you may want to dedicate a queue to IPDS, the queue may still

be used for other PDLs, subject to the rules of DocuSP job and queue

management. The PDL Format must not be set to override for any

PDL other than IPDS for a queue that is used to print IPDS jobs.

Note that a number of DocuSP queue properties can affect the

attributes of the printed job. The IBM host keeps close track of the

number of pages submitted to the DocuSP. However, certain DocuSP

queue properties can affect the number of sheets actually printed. In

addition, changing the attributes of the job could cause IPDS data to

print incorrectly. Setting queue defaults for such properties does not

interfere with the values selected by the DocuSP IPS Manager.

However, overrides for the following queue properties must be

avoided:

•

Quantity

•

Collation

•

Sides Imaged

•

Pages to Print

Installation and setup

2-3