Xerox Phaser 6100DN Panduan Memulai - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Perangkat lunak Xerox Phaser 6100DN. Xerox Phaser 6100DN 37 halaman. Disk overwrite installation and usage
Juga untuk Xerox Phaser 6100DN: Panduan Instalasi (34 halaman), Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Brosur & Spesifikasi (4 halaman), Panduan Pengguna (28 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Instal Manual (2 halaman), Catatan Rilis (2 halaman), Manual (34 halaman), Manual (34 halaman), Panduan Memulai (34 halaman), Panduan Pengguna (32 halaman), Panduan Instalasi dan Pengoperasian (8 halaman)

XEROX DOCUMENT SERVICES PLATFORM SERIES

GETTING STARTED

2. DocuSP 4.1 New

Features

This chapter describes the features and functions now available in

the DocuSP Version 4.10.xx software.

With this release of DocuSP, a new Xerox printer family is

available, the DocuTech 128, 155, or 180 HighLight Color. The

DocuTech HLC is a black and white and one spot color printer,

allowing for print speeds of 128 ppm, 155 ppm, or 180 ppm.

The DocuSP user interface provides the ability to select the

highlight printing color, mismatch action, and mapping colors to

allow customization of the color output to meet customer needs.

For further information on the DocuTech HLC, refer to the

customer documentation or see your Xerox representative.

The DT/DP 75/90 and DT 75MX family of printers is not supported

for the DocuSP 4.1 release. DocuSP 3.8 is available for these

printers.

This release makes available to DocuTech 61xx customers the

LCDS printing capability.

NOTE: The LCDS printing solution is not supported for the Sun

Ultra60 platform. In order to use LCDS on a DocuTech 61xx, the

controller must be a Sun Blade 1000 or higher.