Xerox Phaser 6100DN Panduan Memulai - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Perangkat lunak Xerox Phaser 6100DN. Xerox Phaser 6100DN 34 halaman. Disk overwrite installation and usage
Juga untuk Xerox Phaser 6100DN: Panduan Instalasi (34 halaman), Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Brosur & Spesifikasi (4 halaman), Panduan Pengguna (28 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Instal Manual (2 halaman), Catatan Rilis (2 halaman), Panduan Memulai (37 halaman), Manual (34 halaman), Manual (34 halaman), Panduan Pengguna (32 halaman), Panduan Instalasi dan Pengoperasian (8 halaman)

Reset the Xrite Spectrophotometer

Changing the Retain PDL Setting

Perform the following steps to modify the number of PDLs that can

be retained on the DocuSP.

1. On the DocuSP interface, select Setup and System

Preferences. Select the Job Policy tab.

2. Ensure that the setting for Retain PDL files of last 50 jobs is set

as enabled.

3. Select [OK]. Do not restart the system if you are prompted to do

so.

4. In the background, right-click to open the menu. Open a

terminal window.

5. Login as root user.

6. Type: /opt/XRXnps/bin/setretainPDL # and press <Enter>,

where # is a number between 1 and 100. A value of 0

maintains the current setting.

7. Close the terminal window. Restart the DocuSP software.

Perform the following to reset the spectrophotometer:

Ensure that the calibration strip that matches the serial number on

the spectrophotometer is available. If not, order a new one before

continuing.

1. On the DocuSP controller background menu, open a terminal

window.

2. At the % prompt, type:

cd /opt/XRXnps/XRXcalLib/bin

3. From the % prompt, type:

. /resetDTP

This will restore the spectrophotometer to the factory default

settings.

After the reset is complete, follow the standard procedure to

calibrate the spectrophotometer using the Xrite calibration strip.